[PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel
DORMANTno replies
From: Tomi Valkeinen <hidden>
Date: 2014-02-13 12:32:29
Also in:
linux-devicetree
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2014-03-18 · Re: [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel · Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- 2014-03-18 · Re: [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel · Tomi Valkeinen <hidden>
- 2014-03-17 · Re: [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel · Laurent Pinchart <laurent.pinchart@ideasonboard.com>
- 2014-02-28 · [PATCH 6/9] Doc/DT: Add DT binding documentation for MIPI DSI CM Panel · Tomi Valkeinen <hidden>
Add DT binding documentation for MIPI DSI Command Mode Panel. Signed-off-by: Tomi Valkeinen <redacted> --- .../devicetree/bindings/video/panel-dsi-cm.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/panel-dsi-cm.txt
diff --git a/Documentation/devicetree/bindings/video/panel-dsi-cm.txt b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt
new file mode 100644
index 000000000000..73f422556d4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/panel-dsi-cm.txt@@ -0,0 +1,26 @@ +Generic MIPI DSI Command Mode Panel +=================+ +Required properties: +- compatible: "panel-dsi-cm" + +Optional properties: +- label: a symbolic name for the panel +- gpios: panel reset gpio and TE gpio + +Required nodes: +- Video port for DSI input + +Example +------- + +lcd0: display { + compatible = "tpo,taal", "panel-dsi-cm"; + label = "lcd0"; + + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102, reset */ + + lcd0_in: endpoint { + remote-endpoint = <&dsi1_out_ep>; + }; +};
--
1.8.3.2