[PATCH 19/26] ARM: omap3-beagle-xm.dts: add display information
From: Tomi Valkeinen <hidden>
Date: 2013-12-04 12:28:46
Also in:
linux-devicetree, linux-omap
Subsystem:
the rest · Maintainer:
Linus Torvalds
Signed-off-by: Tomi Valkeinen <redacted> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 67 +++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 31a632f7effb..baec842f4fb5 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts@@ -215,3 +215,70 @@ &usbhsehci { phys = <0 &hsusb2_phy>; }; + +&dpi { + vdds_dsi-supply = <&vpll2>; + + dpi_out: endpoint { + remote-endpoint = <&tfp410_in>; + data-lines = <24>; + }; +}; + +&venc { + vdda_dac-supply = <&vdac>; + + venc_out: endpoint { + remote-endpoint = <&tv_connector_in>; + }; +}; + +/ { + aliases { + display0 = &dvi0; + display1 = &tv0; + }; + + tfp410: encoder@0 { + compatible = "ti,tfp410"; + gpios = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@1 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; + }; + + dvi0: connector@0 { + compatible = "ti,dvi-connector"; + i2c-bus = <&i2c3>; + + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; + }; + + tv0: connector@1 { + compatible = "ti,svideo-connector"; + + tv_connector_in: endpoint { + remote-endpoint = <&venc_out>; + }; + }; +};
--
1.8.3.2