[PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*

Subsystems: framebuffer layer, the rest

3 messages, 3 authors, 2013-10-29 · open the first message on its own page

[PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*

From: Denis Carikli <hidden>
Date: 2013-10-23 12:43:45

Without that fix, drivers using the fb_videomode_from_videomode
  function will not be able to get certain information because
  some DISPLAY_FLAGS_* have no corresponding FB_SYNC_*.

Cc: Jean-Christophe Plagniol-Villard <redacted>
Cc: Tomi Valkeinen <redacted>
Cc: linux-fbdev@vger.kernel.org
Cc: Rob Herring <redacted>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <redacted>
Cc: Ian Campbell <redacted>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <redacted>
Signed-off-by: Denis Carikli <redacted>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <redacted>
---
ChangeLog v2->v3:
- Added Jean-Christophe PLAGNIOL-VILLARD's ACK.
---
 drivers/video/fbmon.c   |    4 ++++
 include/uapi/linux/fb.h |    2 ++
 2 files changed, 6 insertions(+)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 6103fa6..29a9ed0 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1402,6 +1402,10 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
 	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+	if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
+		fbmode->sync |= FB_SYNC_DE_HIGH_ACT;
+	if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
+		fbmode->sync |= FB_SYNC_PIXDAT_HIGH_ACT;
 	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		fbmode->vmode |= FB_VMODE_INTERLACED;
 	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
index fb795c3..30487df 100644
--- a/include/uapi/linux/fb.h
+++ b/include/uapi/linux/fb.h
@@ -215,6 +215,8 @@ struct fb_bitfield {
 					/* vtotal = 144d/288n/576i => PAL  */
 					/* vtotal = 121d/242n/484i => NTSC */
 #define FB_SYNC_ON_GREEN	32	/* sync on green */
+#define FB_SYNC_DE_HIGH_ACT	64	/* data enable high active */
+#define FB_SYNC_PIXDAT_HIGH_ACT	64	/* data enable high active */
 
 #define FB_VMODE_NONINTERLACED  0	/* non interlaced */
 #define FB_VMODE_INTERLACED	1	/* interlaced	*/
-- 
1.7.9.5

[PATCHv3][ 4/5] video: mx3fb: Introduce regulator support.

From: Denis Carikli <hidden>
Date: 2013-10-23 12:43:48

This commit is based on the following commit by Fabio Estevam:
  4344429 video: mxsfb: Introduce regulator support

Cc: Jean-Christophe Plagniol-Villard <redacted>
Cc: Tomi Valkeinen <redacted>
Cc: linux-fbdev@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <redacted>
Signed-off-by: Denis Carikli <redacted>
---
ChangeLog v2->v3:
- The prints are now replaced with non line wrapped prints.
- The regulator retrival has been adapted to the new DT bindings which looks
  more like the IPUv3 ones.
- The regulator_is_enabled checks were kept, because regulator_disable do not
  do such check.
---
 drivers/video/mx3fb.c |   67 ++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 66 insertions(+), 1 deletion(-)
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index de5a6c8..1f2ce6d 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/dma/ipu-dma.h>
+#include <linux/regulator/consumer.h>
 
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
@@ -269,6 +270,7 @@ struct mx3fb_info {
 	struct dma_async_tx_descriptor	*txd;
 	dma_cookie_t			cookie;
 	struct scatterlist		sg[2];
+	struct regulator		*reg_lcd;
 
 	struct fb_var_screeninfo	cur_var; /* current var info */
 };
@@ -1005,6 +1007,7 @@ static void __blank(int blank, struct fb_info *fbi)
 	struct mx3fb_info *mx3_fbi = fbi->par;
 	struct mx3fb_data *mx3fb = mx3_fbi->mx3fb;
 	int was_blank = mx3_fbi->blank;
+	int ret;
 
 	mx3_fbi->blank = blank;
 
@@ -1023,6 +1026,15 @@ static void __blank(int blank, struct fb_info *fbi)
 	case FB_BLANK_HSYNC_SUSPEND:
 	case FB_BLANK_NORMAL:
 		sdc_set_brightness(mx3fb, 0);
+		if (mx3_fbi->reg_lcd) {
+			if (regulator_is_enabled(mx3_fbi->reg_lcd)) {
+				ret = regulator_disable(mx3_fbi->reg_lcd);
+				if (ret)
+					dev_warn(fbi->device,
+						 "lcd regulator disable failed with error: %d\n",
+						 ret);
+			}
+		}
 		memset((char *)fbi->screen_base, 0, fbi->fix.smem_len);
 		/* Give LCD time to update - enough for 50 and 60 Hz */
 		msleep(25);
@@ -1030,6 +1042,15 @@ static void __blank(int blank, struct fb_info *fbi)
 		break;
 	case FB_BLANK_UNBLANK:
 		sdc_enable_channel(mx3_fbi);
+		if (mx3_fbi->reg_lcd) {
+			if (!regulator_is_enabled(mx3_fbi->reg_lcd)) {
+				ret = regulator_enable(mx3_fbi->reg_lcd);
+				if (ret)
+					dev_warn(fbi->device,
+						 "lcd regulator enable failed with error: %d\n",
+						 ret);
+			}
+		}
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
 		break;
 	}
@@ -1206,6 +1227,7 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
 	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+	int ret;
 
 	console_lock();
 	fb_set_suspend(mx3fb->fbi, 1);
@@ -1214,7 +1236,15 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
 	if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
 		sdc_disable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, 0);
-
+		if (mx3_fbi->reg_lcd) {
+			if (regulator_is_enabled(mx3_fbi->reg_lcd)) {
+				ret = regulator_disable(mx3_fbi->reg_lcd);
+				if (ret)
+					dev_warn(&pdev->dev,
+						 "lcd regulator disable failed with error: %d\n",
+						 ret);
+			}
+		}
 	}
 	return 0;
 }
@@ -1226,10 +1256,20 @@ static int mx3fb_resume(struct platform_device *pdev)
 {
 	struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
 	struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
+	int ret;
 
 	if (mx3_fbi->blank = FB_BLANK_UNBLANK) {
 		sdc_enable_channel(mx3_fbi);
 		sdc_set_brightness(mx3fb, mx3fb->backlight_level);
+		if (mx3_fbi->reg_lcd) {
+			if (!regulator_is_enabled(mx3_fbi->reg_lcd)) {
+				ret = regulator_enable(mx3_fbi->reg_lcd);
+				if (ret)
+					dev_warn(&pdev->dev,
+						 "lcd regulator enable failed with error: %d\n",
+						 ret);
+			}
+		}
 	}
 
 	console_lock();
@@ -1373,6 +1413,7 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	struct mx3fb_platform_data *mx3fb_pdata = dev_get_platdata(dev);
 	struct device_node *np = dev->of_node;
 	const char *name;
+	const char *regulator_name;
 	const char *ipu_disp_format;
 	unsigned int irq;
 	struct fb_info *fbi;
@@ -1395,6 +1436,9 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 			return -EINVAL;
 		}
 
+		of_property_read_string(display_np, "regulator-name",
+					&regulator_name);
+
 		of_property_read_string(display_np, "interface-pix-fmt",
 					&ipu_disp_format);
 		if (!ipu_disp_format) {
@@ -1509,6 +1553,24 @@ static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan)
 	if (ret < 0)
 		goto erfb;
 
+	/* In dt mode,
+	 * using devm_regulator_get would require that the proprety referencing
+	 * the regulator phandle has to be inside the mx3fb node.
+	 */
+	if (np) {
+		if (regulator_name)
+			mx3fbi->reg_lcd = regulator_get(NULL, regulator_name);
+	} else {
+		mx3fbi->reg_lcd = devm_regulator_get(dev, "lcd");
+	}
+
+	if (IS_ERR(mx3fbi->reg_lcd)) {
+		dev_warn(mx3fb->dev, "Operating without regulator \"lcd\"\n");
+		mx3fbi->reg_lcd = NULL;
+	} else {
+		dev_info(mx3fb->dev, "Using \"lcd\" Regulator\n");
+	}
+
 	return 0;
 
 erfb:
@@ -1575,6 +1637,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dma_cap_mask_t mask;
 	struct dma_chan *chan;
 	struct dma_chan_request rq;
+	struct mx3fb_info *mx3_fbi;
 
 	/*
 	 * Display Interface (DI) and Synchronous Display Controller (SDC)
@@ -1630,6 +1693,8 @@ ersdc0:
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
+	mx3_fbi = mx3fb->fbi->par;
+	regulator_put(mx3_fbi->reg_lcd);
 	kfree(mx3fb);
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
-- 
1.7.9.5

Re: [PATCHv3][ 1/5] fbdev: Add the lacking FB_SYNC_* for matching the DISPLAY_FLAGS_*

From: Tomi Valkeinen <hidden>
Date: 2013-10-29 10:35:11

On 23/10/13 15:43, Denis Carikli wrote:
quoted hunk
Without that fix, drivers using the fb_videomode_from_videomode
  function will not be able to get certain information because
  some DISPLAY_FLAGS_* have no corresponding FB_SYNC_*.

Cc: Jean-Christophe Plagniol-Villard <redacted>
Cc: Tomi Valkeinen <redacted>
Cc: linux-fbdev@vger.kernel.org
Cc: Rob Herring <redacted>
Cc: Pawel Moll <redacted>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <redacted>
Cc: Ian Campbell <redacted>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Eric Bénard <redacted>
Signed-off-by: Denis Carikli <redacted>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <redacted>
---
ChangeLog v2->v3:
- Added Jean-Christophe PLAGNIOL-VILLARD's ACK.
---
 drivers/video/fbmon.c   |    4 ++++
 include/uapi/linux/fb.h |    2 ++
 2 files changed, 6 insertions(+)
diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 6103fa6..29a9ed0 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -1402,6 +1402,10 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
 	if (vm->flags & DISPLAY_FLAGS_VSYNC_HIGH)
 		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+	if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
+		fbmode->sync |= FB_SYNC_DE_HIGH_ACT;
+	if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
+		fbmode->sync |= FB_SYNC_PIXDAT_HIGH_ACT;
 	if (vm->flags & DISPLAY_FLAGS_INTERLACED)
 		fbmode->vmode |= FB_VMODE_INTERLACED;
 	if (vm->flags & DISPLAY_FLAGS_DOUBLESCAN)
diff --git a/include/uapi/linux/fb.h b/include/uapi/linux/fb.h
index fb795c3..30487df 100644
--- a/include/uapi/linux/fb.h
+++ b/include/uapi/linux/fb.h
@@ -215,6 +215,8 @@ struct fb_bitfield {
 					/* vtotal = 144d/288n/576i => PAL  */
 					/* vtotal = 121d/242n/484i => NTSC */
 #define FB_SYNC_ON_GREEN	32	/* sync on green */
+#define FB_SYNC_DE_HIGH_ACT	64	/* data enable high active */
+#define FB_SYNC_PIXDAT_HIGH_ACT	64	/* data enable high active */
This can't be right. You map both flags to value 64. And the comment is
the same for both.

 Tomi

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help