Re: [RFC 0/1] Adding DT support to video/da8xx-fb.c

Hi,

On 08/08/13 23:15, Darren Etheridge wrote:

This is part of a larger series of patches to upgrade the da8xx-fb.c driver
to support the Texas Instruments AM335x device.  As part of this upgrade
we also want to add devicetree support for both the original da8xx and the
am335x.  Tomi Valkeinen has reviewed the fbdev changes but he suggested
that it was prudent to extract the dt pieces and run it through the
devicetree mailing list for review.

Thanks,
Darren

Darren Etheridge (1):
  video: da8xx-fb: adding dt support

 .../devicetree/bindings/video/fb-da8xx.txt         |   37 +++++++++++
 drivers/video/da8xx-fb.c                           |   67 +++++++++++++++++++-
 2 files changed, 101 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/video/fb-da8xx.txt

I just realized something. We have both drm and fb drivers for the LCDC
IP. The hardware is the same, thus, there should only be one set of DT
bindings, used by both drivers.

I don't know why this didn't occur to me earlier, as it's the same
situation with OMAP DSS.

 Tomi