[PATCH] omap2: panel-generic: Added panel parameters for ortus-com37h3m05dtc/99dtc and sharp-lq070y3dg3b.

Signed-off-by: H. Nikolaus Schaller <redacted>
Signed-off-by: Marek Belisko <redacted>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 53 ++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index bebebd4..d573291 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c

@@ -107,6 +107,33 @@ static struct panel_config generic_dpi_panels[] = {
 		.name			= "sharp_ls",
 	},
 
+	/* Sharp LQ070Y3DG3B */
+	{
+		{
+			.x_res		= 800,
+			.y_res		= 480,
+
+			.pixel_clock	= 33260,
+
+			.hsw		= 128,
+			.hfp		= 64,
+			.hbp		= 64,
+
+			.vsw		= 2,
+			.vfp		= 8,
+			.vbp		= 35,
+
+			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+		},
+		.power_on_delay		= 50,
+		.power_off_delay	= 100,
+		.name			= "sharp_lq070y3dg3b",
+	},
+
 	/* Toppoly TDO35S */
 	{
 		{

@@ -369,6 +396,32 @@ static struct panel_config generic_dpi_panels[] = {
 		.name			= "ortustech_com43h4m10xtc",
 	},
 
+	/* OrtusTech COM37H3M05DTC and COM37H3M99DTC */
+	{
+		{
+			.x_res		= 480,
+			.y_res		= 640,
+			
+			/* pixel clock could be lowered to reduce noise */
+			.pixel_clock	= 22153,
+			
+			.hsw		= 10,
+			.hfp		= 8,
+			.hbp		= 10,
+
+			.vsw		= 3,
+			.vfp		= 4,
+			.vbp		= 4,
+
+			.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+			.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+			.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+			.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+			.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+		},
+		.name			= "ortustech_com37h3m05dtc",
+	},
+
 	/* Innolux AT080TN52 */
 	{
 		{

-- 
1.8.1.2

On 29/08/13 15:35, Marek Belisko wrote:

The drivers in drivers/video/omap2/displays/ are on their way out, and
will probably be removed for 3.12. Please look at the new one at
drivers/video/omap2/displays-new/panel-dpi.c.

 Tomi

Hi Tomi,

On Fri, Aug 30, 2013 at 9:57 AM, Tomi Valkeinen [off-list ref] wrote:

On 29/08/13 15:35, Marek Belisko wrote:

quoted

Signed-off-by: H. Nikolaus Schaller <redacted>
Signed-off-by: Marek Belisko <redacted>
---
 drivers/video/omap2/displays/panel-generic-dpi.c | 53 ++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
index bebebd4..d573291 100644
--- a/drivers/video/omap2/displays/panel-generic-dpi.c
+++ b/drivers/video/omap2/displays/panel-generic-dpi.c

@@ -107,6 +107,33 @@ static struct panel_config generic_dpi_panels[] = {
              .name                   = "sharp_ls",
      },

The drivers in drivers/video/omap2/displays/ are on their way out, and
will probably be removed for 3.12. Please look at the new one at
drivers/video/omap2/displays-new/panel-dpi.c.

I've probably miss series (OMAPDSS: remove old panel model code)
and in time when sent patch it wasn't in linux-next yes. AFAIU generic
panel settings
was moved to board files which is not case for our patch as gta04
(other) board with panel isn't yes mainlined.

 Tomi

Regards,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com