On Fri, Jun 28, 2013 at 04:16:44PM +0900, Jingoo Han wrote:
quoted hunk
Add PHY provider node for the DP PHY.
Signed-off-by: Jingoo Han <redacted>
---
arch/arm/boot/dts/exynos5250.dtsi | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 41cd625..f7bac75 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -614,6 +614,12 @@
interrupts = <0 94 0>;
};
+ dp_phy: video-phy@10040720 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040720 4>;
+ #phy-cells = <0>;
+ };
+
dp-controller {
compatible = "samsung,exynos5-dp";
reg = <0x145b0000 0x1000>;@@ -623,11 +629,8 @@
clock-names = "dp";
#address-cells = <1>;
#size-cells = <0>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
+ phys = <&dp_phy 0>;
phy-cells being 0, means that this would become:
phys = <&dp_phy>;
+ phy-names = "dp";
for the label, I would use something more descriptive such as
'display-port'.
other than that:
Acked-by: Felipe Balbi <redacted>
--
balbi