Re: [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306

[PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller · Maxime Ripard <hidden> · 2013-04-22
[PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306 · Maxime Ripard <hidden> · 2013-04-22
Re: [PATCH 2/2] ARM: dts: cfa10036: Change the OLED display to SSD1306 · Shawn Guo <hidden> · 2013-05-08
[PATCH 1/2] video: ssd1307fb: Add support for SSD1306 OLED controller · Maxime Ripard <hidden> · 2013-04-22
[PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller · Maxime Ripard <hidden> · 2013-04-25
[PATCHv2 0/2] Add support for the Solomon SSD1306 OLED Controller · Tomi Valkeinen <hidden> · 2013-05-08

From: Shawn Guo <hidden>
Date: 2013-05-08 14:00:20
Also in: linux-arm-kernel, lkml

On Mon, Apr 22, 2013 at 11:55:55AM +0200, Maxime Ripard wrote:

The SSD1307 was used in an early prototype that will never get
distributed. The final board now has a SSD1306 instead, that has its own
power generation unit and thus doesn't need any PWM. The panel attached
to it also changed.

Signed-off-by: Maxime Ripard <redacted>

Applied, thanks.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help