[PATCH 25/27] ARM: OMAP: fix dsi regulator names
From: Tomi Valkeinen <hidden>
Date: 2013-05-30 09:36:18
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
board-cm-t35.c and board-ldp.c contain regulator supply entries for vdds_dsi. However, the given device name is wrong. This patch fixes the device name from omapdss_dsi1 to omapdss_dsi.0. Note that as far as I know, DSI driver is not used on these boards, so this should not have caused any problems. Signed-off-by: Tomi Valkeinen <redacted> --- arch/arm/mach-omap2/board-cm-t35.c | 2 +- arch/arm/mach-omap2/board-ldp.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index ee6218c..ce00968 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c@@ -293,7 +293,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { static struct regulator_consumer_supply cm_t35_vio_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card = max 220 mA) */
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d0d17bc..3dbc881 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c@@ -272,7 +272,7 @@ static struct regulator_init_data ldp_vaux1 = { static struct regulator_consumer_supply ldp_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data ldp_vpll2 = {
--
1.8.1.2