Re: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
From: Joachim Eastwood <hidden>
Date: 2012-11-10 10:54:27
Also in:
linux-arm-kernel, linux-can, linux-ide, linux-input, linux-mmc, linux-serial, linux-spi, netdev
Hi Jean-Christophe, On 7 November 2012 12:22, Jean-Christophe PLAGNIOL-VILLARD [off-list ref] wrote:
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <redacted>
Cc: Nicolas Ferre <redacted>
Cc: linux-ide@vger.kernel.org
Cc: linux-input@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-pcmcia@lists.infradead.org
Cc: rtc-linux@googlegroups.com
Cc: spi-devel-general@lists.sourceforge.net
Cc: linux-serial@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
---
HI all,
If it's ok with everyone this will go via at91
with the patch serie than clean up the include/mach
For preparation to switch to arm multiarch kernel
Best Regards,
J.
arch/arm/mach-at91/include/mach/board.h | 55 ----------------------
arch/avr32/mach-at32ap/include/mach/board.h | 7 ---
drivers/ata/pata_at91.c | 2 +-
drivers/input/touchscreen/atmel_tsadcc.c | 2 +-
drivers/mmc/host/atmel-mci.c | 2 +-
drivers/net/can/at91_can.c | 3 +-
drivers/net/ethernet/cadence/at91_ether.c | 2 +-
drivers/pcmcia/at91_cf.c | 2 +-
drivers/rtc/rtc-at91sam9.c | 2 +-
drivers/spi/spi-atmel.c | 2 +-
drivers/tty/serial/atmel_serial.c | 2 +-
drivers/usb/gadget/at91_udc.c | 2 +-
drivers/usb/gadget/atmel_usba_udc.c | 2 +-
drivers/usb/host/ohci-at91.c | 2 +-
drivers/video/atmel_lcdfb.c | 2 +-
include/linux/platform_data/atmel.h | 67 +++++++++++++++++++++++++++
16 files changed, 80 insertions(+), 76 deletions(-)<snip>
quoted hunk ↗ jump to hunk
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 4e980a7..35fc6edb 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c@@ -31,6 +31,7 @@ #include <linux/clk.h> #include <linux/gfp.h> #include <linux/phy.h> +#include <linux/platform_data/atmel.h> #include <asm/io.h> #include <asm/uaccess.h>@@ -38,7 +39,6 @@ #include <mach/at91rm9200_emac.h> #include <asm/gpio.h> -#include <mach/board.h> #include "at91_ether.h"
The at91_ether driver in net-next does not need to be change since it all mach includes has already been removed by other patches and it includes linux/platform_data/macb.h directly. What tree was these patches based on? The at91_ether driver changes has been in linux-next for a long while now. regards Joachim Eastwood