Re: [Qemu-devel] [PATCH] add bochs dispi interface framebuffer driver

On 10/19/12 12:35, Vasilis Liaskovitis wrote:

Hi,

On Thu, Mar 08, 2012 at 11:13:46AM +0100, Gerd Hoffmann wrote:

quoted

This patchs adds a frame buffer driver for (virtual/emulated) vga cards
implementing the bochs dispi interface.  Supported hardware are the
bochs vga card with vbe extension and the qemu standard vga.

The driver uses a fixed depth of 32bpp.  Otherwise it supports the full
(but small) feature set of the bochs dispi interface:  Resolution
switching and display panning.  It is tweaked to maximize fbcon speed,
so you'll get the comfort of the framebuffer console in kvm guests
without performance penalty.

I am testing this driver with qemu-kvm-1.2 or qemu-kvm master (commit)
and "-std vga". The driver works fine in general.

When I test a guest that runs X (ubuntu-12.04 desktop amd64), sometimes parts of
the screen and keyboard input is mixed between the X terminal and fbconsole
terminals. This happens only on the initial X11 login (right after boot or
reboot) and only sometimes.

Only with bochsfb or with vesafb (+ fbdev xorg driver) too?

Xorg driver used is fbdev (i can send xorg log), not sure if another driver
should be used/implemented for the bochsfb.

Yes, that one is fine.

CONFIG_FB_BOCHS=m
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set

Should FB_VESA be turned to "not set" for this test? (it's not tristate in Kconfig)

Btw (slightly off-topic) are other framebuffer drivers suitable for the
standard qemu vga-pci device? Would vesafb or uvesafb work? 

Never tried uvesafb.  vesafb will work too, but run with a fixed
resolution.  bochsfb allows you to change the display resolution at
runtime using fbset.  fbcon is faster too because bochsfb supports
display panning.

Latest version of the patch is here:
  http://www.kraxel.org/cgit/linux/commit/?h=bochsfb

cheers,
  Gerd