On 08/31/2012 02:18 PM, Manjunathappa, Prakash wrote:
It is expected that LCDC to continue to be disabled after
resume if it is blanked before suspend. This is also true
for DVFS. But it is observed that LCDC being enabled after
suspend/resume cycle or DVFS.
Correcting it by having check for FB_BLANK_UNBLANK before
enabling.
Signed-off-by: Manjunathappa, Prakash <redacted>
Applied.
Thanks,
Florian Tobias Schandinat
quoted hunk
---
Applies on top of fbdev-next of Florian Tobias Schandinat's tree.
Since v1:
Re-written commit message.
drivers/video/da8xx-fb.c | 11 +++++++----
1 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 761c8d1..1273354 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -962,7 +962,8 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
par->lcd_fck_rate = clk_get_rate(par->lcdc_clk);
lcd_disable_raster();
lcd_calc_clk_divider(par);
- lcd_enable_raster();
+ if (par->blank = FB_BLANK_UNBLANK)
+ lcd_enable_raster();
}
}
@@ -1486,10 +1487,12 @@ static int fb_resume(struct platform_device *dev)
console_lock();
clk_enable(par->lcdc_clk);
- lcd_enable_raster();
+ if (par->blank = FB_BLANK_UNBLANK) {
+ lcd_enable_raster();
- if (par->panel_power_ctrl)
- par->panel_power_ctrl(1);
+ if (par->panel_power_ctrl)
+ par->panel_power_ctrl(1);
+ }
fb_set_suspend(info, 0);
console_unlock();