[PATCH] da8xx-fb: enable LCDC if FB is unblanked
STALE5146d
From: Manjunathappa, Prakash <hidden>
Date: 2012-08-31 13:12:20
Subsystem:
framebuffer layer, the rest · Maintainers:
Helge Deller, Linus Torvalds
Check for FB_BLANK_UNBLANK before enabling LCDC from PM resume and DVFS. Without this, behavior in case of below used case is not be not expected, 1) Issue FB_BLANK, LCDC disabled. 2) Do suspend/resume cycle or DVFS. 3) Do not expect LCDC to get enabled at this point. Re-enabling of LCDC is done when FB_BLANK_UNBLANK is issued. Signed-off-by: Manjunathappa, Prakash <redacted> --- Applies on top of fbdev-next of Florian Tobias Schandinat's tree. drivers/video/da8xx-fb.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 761c8d1..1273354 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c@@ -962,7 +962,8 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb, par->lcd_fck_rate = clk_get_rate(par->lcdc_clk); lcd_disable_raster(); lcd_calc_clk_divider(par); - lcd_enable_raster(); + if (par->blank = FB_BLANK_UNBLANK) + lcd_enable_raster(); } }
@@ -1486,10 +1487,12 @@ static int fb_resume(struct platform_device *dev) console_lock(); clk_enable(par->lcdc_clk); - lcd_enable_raster(); + if (par->blank = FB_BLANK_UNBLANK) { + lcd_enable_raster(); - if (par->panel_power_ctrl) - par->panel_power_ctrl(1); + if (par->panel_power_ctrl) + par->panel_power_ctrl(1); + } fb_set_suspend(info, 0); console_unlock();
--
1.7.1