[PATCH 2/3] OMAPDSS: HDMI: Replace spinlock with mutex in hdmi_check_hpd_state

Subsystems: framebuffer layer, the rest

STALE5172d

2 messages, 2 authors, 2012-06-29 · open the first message on its own page

[PATCH 2/3] OMAPDSS: HDMI: Replace spinlock with mutex in hdmi_check_hpd_state

From: <hidden>
Date: 2012-06-27 14:16:56

From: Jassi Brar <redacted>

State change of HDMI PHY could potentially take many millisecs, we can do
better by protecting things in hdmi_set_phy_pwr() with a mutex rather than
a spin_lock_irqsave.

Signed-off-by: Jassi Brar <redacted>
---
 drivers/video/omap2/dss/hdmi.c            |    1 +
 drivers/video/omap2/dss/ti_hdmi.h         |    1 +
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    6 ++----
 3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8195c71..0738090 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -758,6 +758,7 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 	hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
 	hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
 	hdmi.ip_data.phy_offset = HDMI_PHY;
+	mutex_init(&hdmi.ip_data.lock);
 
 	hdmi_panel_init();
 
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index d174ca1..cc292b8 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -177,6 +177,7 @@ struct hdmi_ip_data {
 
 	/* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
 	int hpd_gpio;
+	struct mutex lock;
 };
 int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 3fa3d98..04acca9 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -238,10 +238,8 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
 	unsigned long flags;
 	bool hpd;
 	int r;
-	/* this should be in ti_hdmi_4xxx_ip private data */
-	static DEFINE_SPINLOCK(phy_tx_lock);
 
-	spin_lock_irqsave(&phy_tx_lock, flags);
+	mutex_lock(&ip_data->lock);
 
 	hpd = gpio_get_value(ip_data->hpd_gpio);
 
@@ -257,7 +255,7 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
 	}
 
 err:
-	spin_unlock_irqrestore(&phy_tx_lock, flags);
+	mutex_unlock(&ip_data->lock);
 	return r;
 }
 
-- 
1.7.4.1

Re: [PATCH 2/3] OMAPDSS: HDMI: Replace spinlock with mutex in hdmi_check_hpd_state

From: Tomi Valkeinen <hidden>
Date: 2012-06-29 06:45:50

On Wed, 2012-06-27 at 19:34 +0530, jaswinder.singh@linaro.org wrote:
quoted hunk
From: Jassi Brar <redacted>

State change of HDMI PHY could potentially take many millisecs, we can do
better by protecting things in hdmi_set_phy_pwr() with a mutex rather than
a spin_lock_irqsave.

Signed-off-by: Jassi Brar <redacted>
---
 drivers/video/omap2/dss/hdmi.c            |    1 +
 drivers/video/omap2/dss/ti_hdmi.h         |    1 +
 drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c |    6 ++----
 3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 8195c71..0738090 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -758,6 +758,7 @@ static int __init omapdss_hdmihw_probe(struct platform_device *pdev)
 	hdmi.ip_data.core_av_offset = HDMI_CORE_AV;
 	hdmi.ip_data.pll_offset = HDMI_PLLCTRL;
 	hdmi.ip_data.phy_offset = HDMI_PHY;
+	mutex_init(&hdmi.ip_data.lock);
 
 	hdmi_panel_init();
 
diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h
index d174ca1..cc292b8 100644
--- a/drivers/video/omap2/dss/ti_hdmi.h
+++ b/drivers/video/omap2/dss/ti_hdmi.h
@@ -177,6 +177,7 @@ struct hdmi_ip_data {
 
 	/* ti_hdmi_4xxx_ip private data. These should be in a separate struct */
 	int hpd_gpio;
+	struct mutex lock;
 };
 int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data);
 void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data);
diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
index 3fa3d98..04acca9 100644
--- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
+++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c
@@ -238,10 +238,8 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
 	unsigned long flags;
 	bool hpd;
 	int r;
-	/* this should be in ti_hdmi_4xxx_ip private data */
-	static DEFINE_SPINLOCK(phy_tx_lock);
 
-	spin_lock_irqsave(&phy_tx_lock, flags);
+	mutex_lock(&ip_data->lock);
 
 	hpd = gpio_get_value(ip_data->hpd_gpio);
 
@@ -257,7 +255,7 @@ static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data)
 	}
 
 err:
-	spin_unlock_irqrestore(&phy_tx_lock, flags);
+	mutex_unlock(&ip_data->lock);
 	return r;
This introduced a new warning:

drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c: In function 'hdmi_check_hpd_state':
drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c:238:16: warning: unused variable 'flags'

I fixed that.

I'll apply this and the first patch, as I don't think there are any
questions about these.

 Tomi
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help