Re: [PATCH] OMAPDSS: HDMI: Discard phy_tx_enabled member

On Mon, 2012-06-18 at 18:37 +0530, Jassi Brar wrote:

On 18 June 2012 17:54, Tomi Valkeinen [off-list ref] wrote:

quoted

On Mon, 2012-06-18 at 17:16 +0530, Jassi Brar wrote:

quoted

quoted

So preferably I would move request_threaded_irq() to after
hdmi_check_hpd_state() in ti_hdmi_4xxx_phy_enable()  and convert the

No, you can't move the check. If you move it, the HPD state could change
between the check and the request_irq, and we'd miss it.

Wouldn't we then get an irq, and hence another hdmi_check_hpd_state(), for that?

No, if we haven't requested the irq yet. So what could happen:

- initially the cable is unplugged
- ti_hdmi_4xxx_phy_enable() calls hdmi_check_hpd_state(), nothing is
done as cable is unplugged
- cable plugged in
- ti_hdmi_4xxx_phy_enable() calls request_irq. No irq raised, as the
cable's state doesn't change.

We wouldn't know that cable is actually plugged in at that point.

 Tomi