On Tuesday 08 May 2012 05:28 PM, Tomi Valkeinen wrote:

On Mon, 2012-05-07 at 16:51 +0530, Archit Taneja wrote:

quoted

The first patch in this series is a follow up on the previously posted series
'OMAPDSS: APPLY: Treat overlay manager timings as shadow registers'. It is
required for HDMI and DPI interfaces to work properly, it ensures manager
timings are applied in the set_timing() ops for these interfaces.

The next 3 patches remove some unnecessary usage of omap_dss_device pointer in
DISPC and APPLY.

The last 2 patches are miscellaneous fixes and are self explanatory.

Reference tree containing this series:

git://gitorious.org/~boddob/linux-omap-dss2/archit-dss2-clone.git mgr_timing_and_fixes

Tested on OMAP4 SDP.

Archit Taneja (6):
   OMAPDSS: DPI/HDMI: Apply manager timings even if panel is disabled
   OMAPDSS: APPLY: Remove an unnecessary omap_dss_device pointer
   OMAPDSS: DISPC: Remove omap_dss_device pointer usage from
     dispc_mgr_pclk_rate()
   OMAPDSS: DISPC: Remove usage of dispc_mgr_get_device()
   OMAPDSS: Fix DSI_FCLK clock source selection
   OMAPDSS: DISPC: Remove Fake VSYNC support

The first four patches seem to be related (or at least based) to the
set_timings series (and the first patch you already had included in
later version).

Should I take the two last patches and apply them already, as they are
fine and don't depend on anything? You could add the first 4 patches
into the set_timings series.

Yes, you can apply the last 2 patches.

Thanks,
Archit

  Tomi