[PATCH 1/2] OMAPDSS: DISPC: Enable predecimation

From: Chandrabhanu Mahapatra <hidden>
Date: 2012-03-15 11:49:38

In OMAP3 and OMAP4, the DISPC Scaler can downscale an image up to 4 times, and
up to 2 times in OMAP2. However, with predecimation, the image can be reduced
to 16 times by fetching only the necessary pixels in memory. Then this
predecimated image can be downscaled further by the DISPC scaler.

Based on the downscaling required, a prior calculation of predecimation values
for width and height of an image is done. Since, Predecimation reduces quality
of an image higher priorty is given to DISPC Scaler for downscaling.

This code was successfully tested on OMAP2, OMAP3 and OMAP4. Horizontal and
vertical predecimation worked fine except for some synclost errors due to
undocumented errata in OMAP3 which are fixed later and skewed images were seen
on OMAP2 and OMAP3 during horizontal predecimation which will be addressed in
the future patches.

This code is based on code written by Lajos Molnar [off-list ref] who had added
predecimation support for NV12/YUV/rotated/SDMA buffers.

Signed-off-by: Chandrabhanu Mahapatra <redacted>
---
 drivers/video/omap2/dss/dispc.c |  262 +++++++++++++++++++++++++++------------
 1 files changed, 181 insertions(+), 81 deletions(-)

diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e1626a1..5a1963e 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c

@@ -1389,7 +1389,7 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 		enum omap_color_mode color_mode, bool fieldmode,
 		unsigned int field_offset,
 		unsigned *offset0, unsigned *offset1,
-		s32 *row_inc, s32 *pix_inc)
+		s32 *row_inc, s32 *pix_inc, int x_predecim, int y_predecim)
 {
 	u8 ps;

@@ -1435,10 +1435,10 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 		else
 			*offset0 = 0;
 
-		*row_inc = pixinc(1 + (screen_width - width) +
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 +
+			(y_predecim * screen_width - x_predecim * width) +
+			(fieldmode ? screen_width : 0), ps);
+		*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_0 + 4:

@@ -1456,10 +1456,10 @@ static void calc_vrfb_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = field_offset * screen_width * ps;
 		else
 			*offset0 = 0;
-		*row_inc = pixinc(1 - (screen_width + width) -
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 -
+			(y_predecim * screen_width + x_predecim * width) -
+			(fieldmode ? screen_width : 0), ps);
+		*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	default:

@@ -1473,7 +1473,7 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 		enum omap_color_mode color_mode, bool fieldmode,
 		unsigned int field_offset,
 		unsigned *offset0, unsigned *offset1,
-		s32 *row_inc, s32 *pix_inc)
+		s32 *row_inc, s32 *pix_inc, int x_predecim, int y_predecim)
 {
 	u8 ps;
 	u16 fbw, fbh;

@@ -1515,10 +1515,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(1 + (screen_width - fbw) +
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(1, ps);
+		*row_inc = pixinc(1 +
+			(y_predecim * screen_width - fbw * x_predecim) +
+			(fieldmode ? screen_width : 0),	ps);
+		if (color_mode = OMAP_DSS_COLOR_YUV2 ||
+			color_mode = OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(x_predecim, ps);
 		break;
 	case OMAP_DSS_ROT_90:
 		*offset1 = screen_width * (fbh - 1) * ps;

@@ -1526,9 +1530,9 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * (fbh - 1) + 1 +
-				(fieldmode ? 1 : 0), ps);
-		*pix_inc = pixinc(-screen_width, ps);
+		*row_inc = pixinc(screen_width * (fbh * x_predecim - 1) +
+				y_predecim + (fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(-x_predecim * screen_width, ps);
 		break;
 	case OMAP_DSS_ROT_180:
 		*offset1 = (screen_width * (fbh - 1) + fbw - 1) * ps;

@@ -1537,10 +1541,13 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 		else
 			*offset0 = *offset1;
 		*row_inc = pixinc(-1 -
-				(screen_width - fbw) -
-				(fieldmode ? screen_width : 0),
-				ps);
-		*pix_inc = pixinc(-1, ps);
+			(y_predecim * screen_width - fbw * x_predecim) -
+			(fieldmode ? screen_width : 0),	ps);
+		if (color_mode = OMAP_DSS_COLOR_YUV2 ||
+			color_mode = OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(-x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(-x_predecim, ps);
 		break;
 	case OMAP_DSS_ROT_270:
 		*offset1 = (fbw - 1) * ps;

@@ -1548,9 +1555,9 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(-screen_width * (fbh - 1) - 1 -
-				(fieldmode ? 1 : 0), ps);
-		*pix_inc = pixinc(screen_width, ps);
+		*row_inc = pixinc(-screen_width * (fbh * x_predecim - 1) -
+				y_predecim - (fieldmode ? 1 : 0), ps);
+		*pix_inc = pixinc(x_predecim * screen_width, ps);
 		break;
 
 	/* mirroring */

@@ -1560,10 +1567,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * 2 - 1 +
+		*row_inc = pixinc(y_predecim * screen_width * 2 - 1 +
 				(fieldmode ? screen_width : 0),
 				ps);
-		*pix_inc = pixinc(-1, ps);
+		if (color_mode = OMAP_DSS_COLOR_YUV2 ||
+			color_mode = OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(-x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(-x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_90 + 4:

@@ -1572,10 +1583,10 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 + field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(-screen_width * (fbh - 1) + 1 +
-				(fieldmode ? 1 : 0),
+		*row_inc = pixinc(-screen_width * (fbh * x_predecim - 1) +
+				y_predecim + (fieldmode ? 1 : 0),
 				ps);
-		*pix_inc = pixinc(screen_width, ps);
+		*pix_inc = pixinc(x_predecim * screen_width, ps);
 		break;
 
 	case OMAP_DSS_ROT_180 + 4:

@@ -1584,10 +1595,14 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * screen_width * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(1 - screen_width * 2 -
+		*row_inc = pixinc(1 - y_predecim * screen_width * 2 -
 				(fieldmode ? screen_width : 0),
 				ps);
-		*pix_inc = pixinc(1, ps);
+		if (color_mode = OMAP_DSS_COLOR_YUV2 ||
+			color_mode = OMAP_DSS_COLOR_UYVY)
+			*pix_inc = pixinc(x_predecim, 2 * ps);
+		else
+			*pix_inc = pixinc(x_predecim, ps);
 		break;
 
 	case OMAP_DSS_ROT_270 + 4:

@@ -1596,10 +1611,10 @@ static void calc_dma_rotation_offset(u8 rotation, bool mirror,
 			*offset0 = *offset1 - field_offset * ps;
 		else
 			*offset0 = *offset1;
-		*row_inc = pixinc(screen_width * (fbh - 1) - 1 -
-				(fieldmode ? 1 : 0),
+		*row_inc = pixinc(screen_width * (fbh * x_predecim - 1) -
+				y_predecim - (fieldmode ? 1 : 0),
 				ps);
-		*pix_inc = pixinc(-screen_width, ps);
+		*pix_inc = pixinc(-x_predecim * screen_width, ps);
 		break;
 
 	default:

@@ -1686,13 +1701,17 @@ static unsigned long calc_fclk(enum omap_channel channel, u16 width,
 static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		enum omap_channel channel, u16 width, u16 height,
 		u16 out_width, u16 out_height,
-		enum omap_color_mode color_mode, bool *five_taps)
+		enum omap_color_mode color_mode, bool *five_taps,
+		int *x_predecim, int *y_predecim)
 {
 	struct omap_overlay *ovl = omap_dss_get_overlay(plane);
 	const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
 	const int maxsinglelinewidth  				dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
+	const int max_decim_limit = 16;
 	unsigned long fclk = 0;
+	int decim_x, decim_y, error, min_factor;
+	u16 in_width, in_height, in_width_max = 0;
 
 	if (width = out_width && height = out_height)
 		return 0;

@@ -1700,45 +1719,117 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 	if ((ovl->caps & OMAP_DSS_OVL_CAP_SCALE) = 0)
 		return -EINVAL;
 
-	if (out_width < width / maxdownscale ||
-			out_width > width * 8)
+	*x_predecim = max_decim_limit;
+	*y_predecim = max_decim_limit;
+
+	if (color_mode = OMAP_DSS_COLOR_CLUT1 ||
+	    color_mode = OMAP_DSS_COLOR_CLUT2 ||
+	    color_mode = OMAP_DSS_COLOR_CLUT4 ||
+	    color_mode = OMAP_DSS_COLOR_CLUT8) {
+		*x_predecim = 1;
+		*y_predecim = 1;
+		*five_taps = false;
+		return 0;
+	}
+
+	decim_x = DIV_ROUND_UP(DIV_ROUND_UP(width, out_width), maxdownscale);
+	decim_y = DIV_ROUND_UP(DIV_ROUND_UP(height, out_height), maxdownscale);
+
+	min_factor = min(decim_x, decim_y);
+
+	if (decim_x > *x_predecim || out_width > width * 8)
 		return -EINVAL;
 
-	if (out_height < height / maxdownscale ||
-			out_height > height * 8)
+	if (decim_y > *y_predecim || out_height > height * 8)
 		return -EINVAL;
 
 	if (cpu_is_omap24xx()) {
-		if (width > maxsinglelinewidth)
-			DSSERR("Cannot scale max input width exceeded");
 		*five_taps = false;
-		fclk = calc_fclk(channel, width, height, out_width,
-								out_height);
+
+		do {
+			in_height = DIV_ROUND_UP(height, decim_y);
+			in_width = DIV_ROUND_UP(width, decim_x);
+			fclk = calc_fclk(channel, in_width, in_height,
+					out_width, out_height);
+			error = (in_width > maxsinglelinewidth || !fclk ||
+				fclk > dispc_fclk_rate());
+			if (error) {
+				if (decim_x = decim_y) {
+					decim_x = min_factor;
+					decim_y++;
+				} else {
+					swap(decim_x, decim_y);
+					if (decim_x < decim_y)
+						decim_x++;
+				}
+			}
+		} while (decim_x <= *x_predecim && decim_y <= *y_predecim &&
+				error);
+
+		if (in_width > maxsinglelinewidth) {
+			DSSERR("Cannot scale max input width exceeded");
+			return -EINVAL;
+		}
 	} else if (cpu_is_omap34xx()) {
-		if (width > (maxsinglelinewidth * 2)) {
+
+		do {
+			in_height = DIV_ROUND_UP(height, decim_y);
+			in_width = DIV_ROUND_UP(width, decim_x);
+			fclk = calc_fclk_five_taps(channel, in_width, in_height,
+				out_width, out_height, color_mode);
+
+			if (in_width > maxsinglelinewidth)
+				if (in_height > out_height &&
+					in_height < out_height * 2)
+					*five_taps = false;
+			if (!*five_taps)
+				fclk = calc_fclk(channel, in_width, in_height,
+					out_width, out_height);
+			error = (in_width > maxsinglelinewidth * 2 ||
+				(in_width > maxsinglelinewidth && *five_taps) ||
+				!fclk || fclk > dispc_fclk_rate());
+			if (error) {
+				if (decim_x = decim_y) {
+					decim_x = min_factor;
+					decim_y++;
+				} else {
+					swap(decim_x, decim_y);
+					if (decim_x < decim_y)
+						decim_x++;
+				}
+			}
+		} while (decim_x <= *x_predecim && decim_y <= *y_predecim
+			&& error);
+
+		if (in_width > (maxsinglelinewidth * 2)) {
 			DSSERR("Cannot setup scaling");
 			DSSERR("width exceeds maximum width possible");
 			return -EINVAL;
 		}
-		fclk = calc_fclk_five_taps(channel, width, height, out_width,
-						out_height, color_mode);
-		if (width > maxsinglelinewidth) {
-			if (height > out_height && height < out_height * 2)
-				*five_taps = false;
-			else {
-				DSSERR("cannot setup scaling with five taps");
-				return -EINVAL;
-			}
+
+		if (in_width > maxsinglelinewidth && *five_taps) {
+			DSSERR("cannot setup scaling with five taps");
+			return -EINVAL;
 		}
-		if (!*five_taps)
-			fclk = calc_fclk(channel, width, height, out_width,
-					out_height);
 	} else {
-		if (width > maxsinglelinewidth) {
+		in_height = DIV_ROUND_UP(height, decim_y);
+		in_width_max = dispc_fclk_rate() /
+				DIV_ROUND_UP(dispc_mgr_pclk_rate(channel),
+						out_width);
+		decim_x = DIV_ROUND_UP(width, in_width_max);
+		if (decim_x > *x_predecim)
+			return -EINVAL;
+		do {
+			in_width = DIV_ROUND_UP(width, decim_x);
+		} while (decim_x <= *x_predecim &&
+				in_width > maxsinglelinewidth && decim_x++);
+
+		if (in_width > maxsinglelinewidth) {
 			DSSERR("Cannot scale width exceeds max line width");
 			return -EINVAL;
 		}
-		fclk = calc_fclk(channel, width, height, out_width,
+
+		fclk = calc_fclk(channel, in_width, in_height, out_width,
 				out_height);
 	}

@@ -1753,6 +1844,8 @@ static int dispc_ovl_calc_scaling(enum omap_plane plane,
 		return -EINVAL;
 	}
 
+	*x_predecim = decim_x;
+	*y_predecim = decim_y;
 	return 0;
 }

@@ -1768,8 +1861,11 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	s32 pix_inc;
 	u16 frame_height = oi->height;
 	unsigned int field_offset = 0;
-	u16 outw, outh;
+	u16 in_height = oi->height;
+	u16 in_width = oi->width;
+	u16 out_width, out_height;
 	enum omap_channel channel;
+	int x_predecim = 1, y_predecim = 1;
 
 	channel = dispc_ovl_get_channel_out(plane);

@@ -1783,32 +1879,35 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	if (oi->paddr = 0)
 		return -EINVAL;
 
-	outw = oi->out_width = 0 ? oi->width : oi->out_width;
-	outh = oi->out_height = 0 ? oi->height : oi->out_height;
+	out_width = oi->out_width = 0 ? oi->width : oi->out_width;
+	out_height = oi->out_height = 0 ? oi->height : oi->out_height;
 
-	if (ilace && oi->height = outh)
+	if (ilace && oi->height = out_height)
 		fieldmode = 1;
 
 	if (ilace) {
 		if (fieldmode)
-			oi->height /= 2;
+			in_height /= 2;
 		oi->pos_y /= 2;
-		outh /= 2;
+		out_height /= 2;
 
 		DSSDBG("adjusting for ilace: height %d, pos_y %d, "
 				"out_height %d\n",
-				oi->height, oi->pos_y, outh);
+				in_height, oi->pos_y, out_height);
 	}
 
 	if (!dss_feat_color_mode_supported(plane, oi->color_mode))
 		return -EINVAL;
 
-	r = dispc_ovl_calc_scaling(plane, channel, oi->width, oi->height,
-			outw, outh, oi->color_mode,
-			&five_taps);
+	r = dispc_ovl_calc_scaling(plane, channel, in_width, in_height,
+			out_width, out_height, oi->color_mode, &five_taps,
+			&x_predecim, &y_predecim);
 	if (r)
 		return r;
 
+	in_width = DIV_ROUND_UP(in_width, x_predecim);
+	in_height = DIV_ROUND_UP(in_height, y_predecim);
+
 	if (oi->color_mode = OMAP_DSS_COLOR_YUV2 ||
 			oi->color_mode = OMAP_DSS_COLOR_UYVY ||
 			oi->color_mode = OMAP_DSS_COLOR_NV12)

@@ -1822,10 +1921,10 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 		 * so the integer part must be added to the base address of the
 		 * bottom field.
 		 */
-		if (!oi->height || oi->height = outh)
+		if (!in_height || in_height = out_height)
 			field_offset = 0;
 		else
-			field_offset = oi->height / outh / 2;
+			field_offset = in_height / out_height / 2;
 	}
 
 	/* Fields are independent but interleaved in memory. */

@@ -1834,14 +1933,16 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 
 	if (oi->rotation_type = OMAP_DSS_ROT_DMA)
 		calc_dma_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, oi->width, frame_height,
+				oi->screen_width, in_width, frame_height,
 				oi->color_mode, fieldmode, field_offset,
-				&offset0, &offset1, &row_inc, &pix_inc);
+				&offset0, &offset1, &row_inc, &pix_inc,
+				x_predecim, y_predecim);
 	else
 		calc_vrfb_rotation_offset(oi->rotation, oi->mirror,
-				oi->screen_width, oi->width, frame_height,
+				oi->screen_width, in_width, frame_height,
 				oi->color_mode, fieldmode, field_offset,
-				&offset0, &offset1, &row_inc, &pix_inc);
+				&offset0, &offset1, &row_inc, &pix_inc,
+				x_predecim, y_predecim);
 
 	DSSDBG("offset0 %u, offset1 %u, row_inc %d, pix_inc %d\n",
 			offset0, offset1, row_inc, pix_inc);

@@ -1860,19 +1961,18 @@ int dispc_ovl_setup(enum omap_plane plane, struct omap_overlay_info *oi,
 	dispc_ovl_set_row_inc(plane, row_inc);
 	dispc_ovl_set_pix_inc(plane, pix_inc);
 
-	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, oi->width,
-			oi->height, outw, outh);
+	DSSDBG("%d,%d %dx%d -> %dx%d\n", oi->pos_x, oi->pos_y, in_width,
+			in_height, out_width, out_height);
 
 	dispc_ovl_set_pos(plane, oi->pos_x, oi->pos_y);
 
-	dispc_ovl_set_pic_size(plane, oi->width, oi->height);
+	dispc_ovl_set_pic_size(plane, in_width, in_height);
 
 	if (ovl->caps & OMAP_DSS_OVL_CAP_SCALE) {
-		dispc_ovl_set_scaling(plane, oi->width, oi->height,
-				   outw, outh,
-				   ilace, five_taps, fieldmode,
+		dispc_ovl_set_scaling(plane, in_width, in_height, out_width,
+				   out_height, ilace, five_taps, fieldmode,
 				   oi->color_mode, oi->rotation);
-		dispc_ovl_set_vid_size(plane, outw, outh);
+		dispc_ovl_set_vid_size(plane, out_width, out_height);
 		dispc_ovl_set_vid_color_conv(plane, cconv);
 	}

-- 
1.7.1

Re: [PATCH 1/2] OMAPDSS: DISPC: Enable predecimation

From: Ville Syrjälä <syrjala@sci.fi>
Date: 2012-03-15 22:28:11

On Thu, Mar 15, 2012 at 05:18:28PM +0530, Chandrabhanu Mahapatra wrote:

In OMAP3 and OMAP4, the DISPC Scaler can downscale an image up to 4 times, and
up to 2 times in OMAP2. However, with predecimation, the image can be reduced
to 16 times by fetching only the necessary pixels in memory. Then this
predecimated image can be downscaled further by the DISPC scaler.

Now, where does that number 16 come from? IIRC the hardware can skip
basically any number of pixels/rows. I certainly didn't add any such
limit to the code in the harmattan kernel, and distinctly remember
being able to downscale the N9/N950 UI even down to 1 pixel size :)

Based on the downscaling required, a prior calculation of predecimation values
for width and height of an image is done. Since, Predecimation reduces quality
of an image higher priorty is given to DISPC Scaler for downscaling.

This code was successfully tested on OMAP2, OMAP3 and OMAP4. Horizontal and
vertical predecimation worked fine except for some synclost errors due to
undocumented errata in OMAP3 which are fixed later and skewed images were seen
on OMAP2 and OMAP3 during horizontal predecimation which will be addressed in
the future patches.

All the rotation offset calculations still look suspiciously different
to what is in the harmattan kernel. I remember that the original code
was quite broken, and I fixed a lot of things when I was implementing
pre-decimation and some rotation stuff for the N9/N950. Too bad I never
managed to push that stuff upstream...

-- 
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/

Re: [PATCH 1/2] OMAPDSS: DISPC: Enable predecimation

From: Mahapatra, Chandrabhanu <hidden>
Date: 2012-03-16 12:11:54

On Fri, Mar 16, 2012 at 3:58 AM, Ville Syrjälä [off-list ref] wrote:

On Thu, Mar 15, 2012 at 05:18:28PM +0530, Chandrabhanu Mahapatra wrote:

quoted

In OMAP3 and OMAP4, the DISPC Scaler can downscale an image up to 4 times, and
up to 2 times in OMAP2. However, with predecimation, the image can be reduced
to 16 times by fetching only the necessary pixels in memory. Then this
predecimated image can be downscaled further by the DISPC scaler.

Now, where does that number 16 come from? IIRC the hardware can skip
basically any number of pixels/rows. I certainly didn't add any such
limit to the code in the harmattan kernel, and distinctly remember
being able to downscale the N9/N950 UI even down to 1 pixel size :)

Yes, you are right. I have done vertical predecimation to a size of 2
lines beyond which it failed.
This limitation of 16 is actually on horizontal predecimation as was
mentioned by the hardware guys. Let me explain what we once discussed
with Archit.
The pipeline is configured to use a burst of size 8 * 128 bits and DSS
uses 8 L3 clock cycles to fetch it. So, burst consists of 8 mini
bursts of 16 bytes each.

Now, there are two possible situations:
1) Each mini burst has some valid pixels, so all 16 bytes are fetched
by DISPC DMA and the uneeded pixels are discarded. This case can be
shown as
    pixelinc -1 + bpp =< 16

2) Some mini bursts don't have any valid pixels, so these will not be
fecthed by the DISPC DMA. So, L3 interconnect may handover the bus
over so some other initiator and inturn delay the fecthing of pixels
leading to UNDERFLOWS. This case can be shown as
   pixellinc -1 + bpp > 16.
To avoid these UNDERFLOWS we better have a limitation of 16 on
horizontal predecimation. Anyways, 16 times predecimation followed by
2/4 times downscaling (may it be horizontal or vertical) by DISPC
SCALER is more than enough for any usecase required.

quoted

Based on the downscaling required, a prior calculation of predecimation values
for width and height of an image is done. Since, Predecimation reduces quality
of an image higher priorty is given to DISPC Scaler for downscaling.

This code was successfully tested on OMAP2, OMAP3 and OMAP4. Horizontal and
vertical predecimation worked fine except for some synclost errors due to
undocumented errata in OMAP3 which are fixed later and skewed images were seen
on OMAP2 and OMAP3 during horizontal predecimation which will be addressed in
the future patches.

All the rotation offset calculations still look suspiciously different
to what is in the harmattan kernel. I remember that the original code
was quite broken, and I fixed a lot of things when I was implementing
pre-decimation and some rotation stuff for the N9/N950. Too bad I never
managed to push that stuff upstream...

A number of variables are different in mainline kernel from that used
in your code. I did fix some of the rotation code to get the best
results. I will consider your suggestions for further improvement.

--
Ville Syrjälä
syrjala@sci.fi
http://www.sci.fi/~syrjala/



-- 
Chandrabhanu Mahapatra
Texas Instruments India Pvt. Ltd.

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help