s3fb: fix Virge/VX

Started by Ondrej Zary on Dec 19, 2011 · 2 messages from 2 authors · Last reply Dec 21, 2011

STALE5441d

open the first message on its own page

Ondrej Zary

Message details and related content
Open message details and related content
Add memory size detection for Virge/VX and small delay in mode setting (same
as in X.org driver) to fix blank screen problem.

Also adjust DTPC position to fix garbled screen in some modes (tested that
this adjustment does not break other cards - at least Trio32, Trio64V+,
Trio64V2/DX, Virge, Virge/DX).

Tested on ELSA Winner 2000AVI/3D.

Signed-off-by: Ondrej Zary <redacted>

--- linux-3.1-orig/drivers/video/s3fb.c	2011-10-24 09:10:05.000000000 +0200
+++ linux-3.1/drivers/video/s3fb.c	2011-12-19 23:28:34.000000000 +0100
@@ -727,7 +727,7 @@
 	if (par->chip = CHIP_988_VIRGE_VX) {
 		vga_wcrt(par->state.vgabase, 0x50, 0x00);
 		vga_wcrt(par->state.vgabase, 0x67, 0x50);
-
+		msleep(10); /* screen remains blank sometimes without this */
 		vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
 		vga_wcrt(par->state.vgabase, 0x66, 0x90);
 	}
@@ -901,7 +901,8 @@
 
 	/* Set Data Transfer Position */
 	hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
-	value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
+	/* + 2 is needed for Virge/VX, does no harm on other cards */
+	value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
 	svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
 
 	memset_io(info->screen_base, 0x00, screen_size);
@@ -1215,6 +1216,31 @@
 			info->screen_size = 2 << 20;
 			break;
 		}
+	} else if (par->chip = CHIP_988_VIRGE_VX) {
+		switch ((regval & 0x60) >> 5) {
+		case 0: /* 2MB */
+			info->screen_size = 2 << 20;
+			break;
+		case 1: /* 4MB */
+			info->screen_size = 4 << 20;
+			break;
+		case 2: /* 6MB */
+			info->screen_size = 6 << 20;
+			break;
+		case 3: /* 8MB */
+			info->screen_size = 8 << 20;
+			break;
+		}
+		/* off-screen memory */
+		regval = vga_rcrt(par->state.vgabase, 0x37);
+		switch ((regval & 0x60) >> 5) {
+		case 1: /* 4MB */
+			info->screen_size -= 4 << 20;
+			break;
+		case 2: /* 2MB */
+			info->screen_size -= 2 << 20;
+			break;
+		}
 	} else
 		info->screen_size = s3_memsizes[regval >> 5] << 10;
 	info->fix.smem_len = info->screen_size;


-- 
Ondrej Zary

Florian Tobias Schandinat replied to Ondrej Zary

Message details and related content
Open message details and related content
On 12/19/2011 10:39 PM, Ondrej Zary wrote:
Add memory size detection for Virge/VX and small delay in mode setting (same
as in X.org driver) to fix blank screen problem.

Also adjust DTPC position to fix garbled screen in some modes (tested that
this adjustment does not break other cards - at least Trio32, Trio64V+,
Trio64V2/DX, Virge, Virge/DX).

Tested on ELSA Winner 2000AVI/3D.

Signed-off-by: Ondrej Zary <redacted>
Applied.


Thanks,

Florian Tobias Schandinat
quoted hunk
--- linux-3.1-orig/drivers/video/s3fb.c	2011-10-24 09:10:05.000000000 +0200
+++ linux-3.1/drivers/video/s3fb.c	2011-12-19 23:28:34.000000000 +0100
@@ -727,7 +727,7 @@
 	if (par->chip = CHIP_988_VIRGE_VX) {
 		vga_wcrt(par->state.vgabase, 0x50, 0x00);
 		vga_wcrt(par->state.vgabase, 0x67, 0x50);
-
+		msleep(10); /* screen remains blank sometimes without this */
 		vga_wcrt(par->state.vgabase, 0x63, (mode <= 2) ? 0x90 : 0x09);
 		vga_wcrt(par->state.vgabase, 0x66, 0x90);
 	}
@@ -901,7 +901,8 @@
 
 	/* Set Data Transfer Position */
 	hsstart = ((info->var.xres + info->var.right_margin) * hmul) / 8;
-	value = clamp((htotal + hsstart + 1) / 2, hsstart + 4, htotal + 1);
+	/* + 2 is needed for Virge/VX, does no harm on other cards */
+	value = clamp((htotal + hsstart + 1) / 2 + 2, hsstart + 4, htotal + 1);
 	svga_wcrt_multi(par->state.vgabase, s3_dtpc_regs, value);
 
 	memset_io(info->screen_base, 0x00, screen_size);
@@ -1215,6 +1216,31 @@
 			info->screen_size = 2 << 20;
 			break;
 		}
+	} else if (par->chip = CHIP_988_VIRGE_VX) {
+		switch ((regval & 0x60) >> 5) {
+		case 0: /* 2MB */
+			info->screen_size = 2 << 20;
+			break;
+		case 1: /* 4MB */
+			info->screen_size = 4 << 20;
+			break;
+		case 2: /* 6MB */
+			info->screen_size = 6 << 20;
+			break;
+		case 3: /* 8MB */
+			info->screen_size = 8 << 20;
+			break;
16 more quoted lines






    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread / next series-diff position

          
kprevious message in thread / previous series-diff position

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help