[PATCH 08/10] omapfb: lcd_ams_delta: Drive control lines over GPIO
From: Janusz Krzysztofik <hidden>
Date: 2011-12-11 20:17:17
Also in:
linux-arm-kernel, linux-omap, lkml
Subsystem:
arm port, framebuffer layer, omap1 support, the rest · Maintainers:
Russell King, Helge Deller, Aaro Koskinen, Janusz Krzysztofik, Linus Torvalds
Don't use Amstrad Delta custom I/O functions any longer, use GPIO API instead. Depends on patch 5/10 "MTD: NAND: ams-delta: Use GPIO instead of custom I/O". Signed-off-by: Janusz Krzysztofik <redacted> --- arch/arm/mach-omap1/board-ams-delta.c | 10 ------- arch/arm/plat-omap/include/plat/board-ams-delta.h | 2 - drivers/video/omap/lcd_ams_delta.c | 27 +++++++++++++++----- 3 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 5705481..b7422e3 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c@@ -232,16 +232,6 @@ static struct gpio _latch_gpios[] __initconst = { .label = "dockit2", }, { - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_vblen", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_ndisp", - }, - { .gpio = AMS_DELTA_GPIO_PIN_KEYBRD_PWR, .flags = GPIOF_OUT_INIT_LOW, .label = "keybrd_pwr",
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 73fdab9..1d0706e 100644
--- a/arch/arm/plat-omap/include/plat/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h@@ -28,8 +28,6 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 #define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 #define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index 6978ae4..73b211b 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c@@ -25,6 +25,7 @@ #include <linux/io.h> #include <linux/delay.h> #include <linux/lcd.h> +#include <linux/gpio.h> #include <plat/board-ams-delta.h> #include <mach/hardware.h>
@@ -98,29 +99,41 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ +static struct gpio _gpios[] __initconst_or_module = { + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_vblen", + }, + { + .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, + .flags = GPIOF_OUT_INIT_LOW, + .label = "lcd_ndisp", + }, +}; + static int ams_delta_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { - return 0; + return gpio_request_array(_gpios, ARRAY_SIZE(_gpios)); } static void ams_delta_panel_cleanup(struct lcd_panel *panel) { + gpio_free_array(_gpios, ARRAY_SIZE(_gpios)); } static int ams_delta_panel_enable(struct lcd_panel *panel) { - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, - AMS_DELTA_LATCH2_LCD_NDISP); - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, - AMS_DELTA_LATCH2_LCD_VBLEN); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1); return 0; } static void ams_delta_panel_disable(struct lcd_panel *panel) { - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_VBLEN, 0); - ams_delta_latch2_write(AMS_DELTA_LATCH2_LCD_NDISP, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0); + gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0); } static unsigned long ams_delta_panel_get_caps(struct lcd_panel *panel)
--
1.7.3.4