On Sun, Apr 03, 2011 at 10:36:15PM +0200, Ondrej Zary wrote:

Add I2C support for the DDC bus and also default mode initialization by
reading monitor EDID to the s3fb driver.

Tested on Trio64V+ (2 cards), Trio64V2/DX, Virge (3 cards),
Virge/DX (3 cards), Virge/GX2, Trio3D/2X (4 cards), Trio3D.

Will probably not work on Trio32 - my 2 cards have DDC support in BIOS that
looks different from the other cards but the DDC pins on the VGA connector
are not connected.

Signed-off-by: Ondrej Zary <redacted>

Acked-by: Ondrej Zajicek <redacted>

-- 
Elen sila lumenn' omentielvo

Ondrej 'SanTiago' Zajicek (email: santiago@crfreenet.org)
OpenPGP encrypted e-mails preferred (KeyID 0x11DEADC3, wwwkeys.pgp.net)
"To err is human -- to blame it on a computer is even more so."