There is a linker error from lcd_2430sdp.c if CONFIG_TWL4030_CORE is not
set. This can be triggered on OMAP2 builds when OMAP3 or OMAP4 are not set.
drivers/built-in.o: In function `sdp2430_panel_disable':
drivers/video/omap/lcd_2430sdp.c:123: undefined reference to `twl_i2c_write_u8'
drivers/video/omap/lcd_2430sdp.c:124: undefined reference to `twl_i2c_write_u8'
drivers/built-in.o: In function `sdp2430_panel_enable':
drivers/video/omap/lcd_2430sdp.c:110: undefined reference to `twl_i2c_write_u8'
drivers/video/omap/lcd_2430sdp.c:112: undefined reference to `twl_i2c_write_u8'
Fix this by selecting the TWL4030_CORE for MACH_OMAP_2430SDP when building
with CONFIG_FB_OMAP as there is no own Kconfig entry for lcd_2430 and it is
compiled always when both MACH_OMAP_2430SDP and FB_OMAP are set.
Signed-off-by: Jarkko Nikula <redacted>
---
Quite old issue probably. I don't think any fancier fix is required as this
is legacy omapfb code?
---
drivers/video/omap/Kconfig | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 083c8fe..c981249 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -5,6 +5,7 @@ config FB_OMAP
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
+ select TWL4030_CORE if MACH_OMAP_2430SDP
help
Frame buffer driver for OMAP based boards.
--
1.7.2.3