@@ -0,0 +1,819 @@
+/*
+ * Support for ACX565AKM LCD Panel used on Nokia N900
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+
+#include <plat/display.h>
+
+#define MIPID_CMD_READ_DISP_ID 0x04
+#define MIPID_CMD_READ_RED 0x06
+#define MIPID_CMD_READ_GREEN 0x07
+#define MIPID_CMD_READ_BLUE 0x08
+#define MIPID_CMD_READ_DISP_STATUS 0x09
+#define MIPID_CMD_RDDSDR 0x0F
+#define MIPID_CMD_SLEEP_IN 0x10
+#define MIPID_CMD_SLEEP_OUT 0x11
+#define MIPID_CMD_DISP_OFF 0x28
+#define MIPID_CMD_DISP_ON 0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS 0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS 0x52
+#define MIPID_CMD_WRITE_CTRL_DISP 0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON (1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON (1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON (1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON (1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP 0x54
+#define MIPID_CMD_WRITE_CABC 0x55
+#define MIPID_CMD_READ_CABC 0x56
+
+#define MIPID_VER_LPH8923 3
+#define MIPID_VER_LS041Y3 4
+#define MIPID_VER_L4F00311 8
+#define MIPID_VER_ACX565AKM 9
+
+struct acx565akm_device {
+ char *name;
+ int enabled;
+ int model;
+ int revision;
+ u8 display_id[3];
+ unsigned has_bc:1;
+ unsigned has_cabc:1;
+ unsigned cabc_mode;
+ unsigned long hw_guard_end; /* next value of jiffies
+ when we can issue the
+ next sleep in/out command */
+ unsigned long hw_guard_wait; /* max guard time in jiffies */
+
+ struct spi_device *spi;
+ struct mutex mutex;
+
+ struct omap_dss_device *dssdev;
+ struct backlight_device *bl_dev;
+};
+
+static struct acx565akm_device acx_dev;
+static int acx565akm_bl_update_status(struct backlight_device *dev);
+
+/*--------------------MIPID interface-----------------------------*/
+
+static void acx565akm_transfer(struct acx565akm_device *md, int cmd,
+ const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct spi_message m;
+ struct spi_transfer *x, xfer[5];
+ int r;
+
+ BUG_ON(md->spi = NULL);
+
+ spi_message_init(&m);
+
+ memset(xfer, 0, sizeof(xfer));
+ x = &xfer[0];
+
+ cmd &= 0xff;
+ x->tx_buf = &cmd;
+ x->bits_per_word = 9;
+ x->len = 2;
+
+ if (rlen > 1 && wlen = 0) {
+ /*
+ * Between the command and the response data there is a
+ * dummy clock cycle. Add an extra bit after the command
+ * word to account for this.
+ */
+ x->bits_per_word = 10;
+ cmd <<= 1;
+ }
+ spi_message_add_tail(x, &m);
+
+ if (wlen) {
+ x++;
+ x->tx_buf = wbuf;
+ x->len = wlen;
+ x->bits_per_word = 9;
+ spi_message_add_tail(x, &m);
+ }
+
+ if (rlen) {
+ x++;
+ x->rx_buf = rbuf;
+ x->len = rlen;
+ spi_message_add_tail(x, &m);
+ }
+
+ r = spi_sync(md->spi, &m);
+ if (r < 0)
+ dev_dbg(&md->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct acx565akm_device *md, int cmd)
+{
+ acx565akm_transfer(md, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct acx565akm_device *md,
+ int reg, const u8 *buf, int len)
+{
+ acx565akm_transfer(md, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct acx565akm_device *md,
+ int reg, u8 *buf, int len)
+{
+ acx565akm_transfer(md, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct acx565akm_device *md, int guard_msec)
+{
+ md->hw_guard_wait = msecs_to_jiffies(guard_msec);
+ md->hw_guard_end = jiffies + md->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct acx565akm_device *md)
+{
+ unsigned long wait = md->hw_guard_end - jiffies;
+
+ if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(wait);
+ }
+}
+
+/*----------------------MIPID wrappers----------------------------*/
+
+static void set_sleep_mode(struct acx565akm_device *md, int on)
+{
+ int cmd;
+
+ if (on)
+ cmd = MIPID_CMD_SLEEP_IN;
+ else
+ cmd = MIPID_CMD_SLEEP_OUT;
+ /*
+ * We have to keep 120msec between sleep in/out commands.
+ * (8.2.15, 8.2.16).
+ */
+ hw_guard_wait(md);
+ acx565akm_cmd(md, cmd);
+ hw_guard_start(md, 120);
+}
+
+static void set_display_state(struct acx565akm_device *md, int enabled)
+{
+ int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+ acx565akm_cmd(md, cmd);
+}
+
+static int panel_enabled(struct acx565akm_device *md)
+{
+ u32 disp_status;
+ int enabled;
+
+ acx565akm_read(md, MIPID_CMD_READ_DISP_STATUS, (u8 *)&disp_status, 4);
+ disp_status = __be32_to_cpu(disp_status);
+ enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+ dev_dbg(&md->spi->dev,
+ "LCD panel %senabled by bootloader (status 0x%04x)\n",
+ enabled ? "" : "not ", disp_status);
+ return enabled;
+}
+
+static int panel_detect(struct acx565akm_device *md)
+{
+ acx565akm_read(md, MIPID_CMD_READ_DISP_ID, md->display_id, 3);
+ dev_dbg(&md->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+ md->display_id[0], md->display_id[1], md->display_id[2]);
+
+ switch (md->display_id[0]) {
+ case 0x10:
+ md->model = MIPID_VER_ACX565AKM;
+ md->name = "acx565akm";
+ md->has_bc = 1;
+ md->has_cabc = 1;
+ break;
+ case 0x29:
+ md->model = MIPID_VER_L4F00311;
+ md->name = "l4f00311";
+ break;
+ case 0x45:
+ md->model = MIPID_VER_LPH8923;
+ md->name = "lph8923";
+ break;
+ case 0x83:
+ md->model = MIPID_VER_LS041Y3;
+ md->name = "ls041y3";
+ break;
+ default:
+ md->name = "unknown";
+ dev_err(&md->spi->dev, "invalid display ID\n");
+ return -ENODEV;
+ }
+
+ md->revision = md->display_id[1];
+
+ dev_info(&md->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+ md->name, md->revision);
+
+ return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct acx565akm_device *md, int enable)
+{
+ u16 ctrl;
+
+ acx565akm_read(md, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+ if (enable) {
+ ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+ CTRL_DISP_BACKLIGHT_ON;
+ } else {
+ ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+ CTRL_DISP_BACKLIGHT_ON);
+ }
+
+ ctrl |= 1 << 8;
+ acx565akm_write(md, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct acx565akm_device *md, unsigned mode)
+{
+ u16 cabc_ctrl;
+
+ md->cabc_mode = mode;
+ if (!md->enabled)
+ return;
+ cabc_ctrl = 0;
+ acx565akm_read(md, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+ cabc_ctrl &= ~3;
+ cabc_ctrl |= (1 << 8) | (mode & 3);
+ acx565akm_write(md, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct acx565akm_device *md)
+{
+ return md->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct acx565akm_device *md)
+{
+ u8 cabc_ctrl;
+
+ acx565akm_read(md, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+ return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct acx565akm_device *md, int level)
+{
+ int bv;
+
+ bv = level | (1 << 8);
+ acx565akm_write(md, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+ if (level)
+ enable_backlight_ctrl(md, 1);
+ else
+ enable_backlight_ctrl(md, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct acx565akm_device *md)
+{
+ u8 bv;
+
+ acx565akm_read(md, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+ return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+ struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+ int r;
+ int level;
+
+ dev_dbg(&md->spi->dev, "%s\n", __func__);
+
+ mutex_lock(&md->mutex);
+
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK)
+ level = dev->props.brightness;
+ else
+ level = 0;
+
+ r = 0;
+ if (md->has_bc)
+ acx565akm_set_brightness(md, level);
+ else if (md->dssdev->set_backlight)
+ r = md->dssdev->set_backlight(md->dssdev, level);
+ else
+ r = -ENODEV;
+
+ mutex_unlock(&md->mutex);
+
+ return r;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+ struct acx565akm_device *md = dev_get_drvdata(&dev->dev);
+
+ dev_dbg(&dev->dev, "%s\n", __func__);
+
+ if (!md->has_bc && md->dssdev->set_backlight = NULL)
+ return -ENODEV;
+
+ if (dev->props.fb_blank = FB_BLANK_UNBLANK &&
+ dev->props.power = FB_BLANK_UNBLANK) {
+ if (md->has_bc)
+ return acx565akm_get_actual_brightness(md);
+ else
+ return dev->props.brightness;
+ }
+
+ return 0;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+ .get_brightness = acx565akm_bl_get_intensity,
+ .update_status = acx565akm_bl_update_status,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char *cabc_modes[] = {
+ "off", /* always used when CABC is not supported */
+ "ui",
+ "still-image",
+ "moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct acx565akm_device *md = dev_get_drvdata(dev);
+ const char *mode_str;
+ int mode;
+ int len;
+
+ if (!md->has_cabc)
+ mode = 0;
+ else
+ mode = get_cabc_mode(md);
+ mode_str = "unknown";
+ if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+ mode_str = cabc_modes[mode];
+ len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+ return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct acx565akm_device *md = dev_get_drvdata(dev);
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+ const char *mode_str = cabc_modes[i];
+ int cmp_len = strlen(mode_str);
+
+ if (count > 0 && buf[count - 1] = '\n')
+ count--;
+ if (count != cmp_len)
+ continue;
+
+ if (strncmp(buf, mode_str, cmp_len) = 0)
+ break;
+ }
+
+ if (i = ARRAY_SIZE(cabc_modes))
+ return -EINVAL;
+
+ if (!md->has_cabc && i != 0)
+ return -EINVAL;
+
+ mutex_lock(&md->mutex);
+ set_cabc_mode(md, i);
+ mutex_unlock(&md->mutex);
+
+ return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct acx565akm_device *md = dev_get_drvdata(dev);
+ int len;
+ int i;
+
+ if (!md->has_cabc)
+ return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+ for (i = 0, len = 0;
+ len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+ len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+ i ? " " : "", cabc_modes[i],
+ i = ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+ return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+ show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+ show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+ &dev_attr_cabc_mode.attr,
+ &dev_attr_cabc_available_modes.attr,
+ NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+ .attrs = bldev_attrs,
+};
+
+
+/*---------------------------ACX Panel----------------------------*/
+
+static int acx_get_recommended_bpp(struct omap_dss_device *dssdev)
+{
+ return 16;
+}
+
+static struct omap_video_timings acx_panel_timings = {
+ .x_res = 800,
+ .y_res = 480,
+ .pixel_clock = 24000,
+ .hfp = 28,
+ .hsw = 4,
+ .hbp = 24,
+ .vfp = 3,
+ .vsw = 3,
+ .vbp = 4,
+};
+
+static int acx_panel_probe(struct omap_dss_device *dssdev)
+{
+ int r;
+ struct acx565akm_device *md = &acx_dev;
+ struct backlight_device *bldev;
+ int max_brightness, brightness;
+ struct backlight_properties props;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS;
+ /* FIXME AC bias ? */
+ dssdev->panel.timings = acx_panel_timings;
+
+ if (dssdev->platform_enable)
+ dssdev->platform_enable(dssdev);
+ /*
+ * After reset we have to wait 5 msec before the first
+ * command can be sent.
+ */
+ msleep(5);
+
+ md->enabled = panel_enabled(md);
+
+ r = panel_detect(md);
+ if (r) {
+ dev_err(&dssdev->dev, "%s panel detect error\n", __func__);
+ if (!md->enabled && dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+ return r;
+ }
+
+ mutex_lock(&acx_dev.mutex);
+ acx_dev.dssdev = dssdev;
+ mutex_unlock(&acx_dev.mutex);
+
+ if (!md->enabled) {
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+ }
+
+ /*------- Backlight control --------*/
+
+ props.fb_blank = FB_BLANK_UNBLANK;
+ props.power = FB_BLANK_UNBLANK;
+
+ bldev = backlight_device_register("acx565akm", &md->spi->dev,
+ md, &acx565akm_bl_ops, &props);
+ md->bl_dev = bldev;
+ if (md->has_cabc) {
+ r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+ if (r) {
+ dev_err(&bldev->dev,
+ "%s failed to create sysfs files\n", __func__);
+ backlight_device_unregister(bldev);
+ return r;
+ }
+ md->cabc_mode = get_hw_cabc_mode(md);
+ }
+
+ if (md->has_bc)
+ max_brightness = 255;
+ else
+ max_brightness = dssdev->max_backlight_level;
+
+ if (md->has_bc)
+ brightness = acx565akm_get_actual_brightness(md);
+ else if (dssdev->get_backlight)
+ brightness = dssdev->get_backlight(dssdev);
+ else
+ brightness = 0;
+
+ bldev->props.max_brightness = max_brightness;
+ bldev->props.brightness = brightness;
+
+ acx565akm_bl_update_status(bldev);
+ return 0;
+}
+
+static void acx_panel_remove(struct omap_dss_device *dssdev)
+{
+ struct acx565akm_device *md = &acx_dev;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ sysfs_remove_group(&md->bl_dev->dev.kobj, &bldev_attr_group);
+ backlight_device_unregister(md->bl_dev);
+ mutex_lock(&acx_dev.mutex);
+ acx_dev.dssdev = NULL;
+ mutex_unlock(&acx_dev.mutex);
+}
+
+static int acx_panel_power_on(struct omap_dss_device *dssdev)
+{
+ struct acx565akm_device *md = &acx_dev;
+ int r;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+ mutex_lock(&md->mutex);
+
+ r = omapdss_sdi_display_enable(dssdev);
+ if (r) {
+ pr_err("%s sdi enable failed\n", __func__);
+ return r;
+ }
+
+ /*FIXME tweak me */
+ msleep(50);
+
+ if (dssdev->platform_enable) {
+ r = dssdev->platform_enable(dssdev);
+ if (r)
+ goto fail;
+ }
+
+ if (md->enabled) {
+ dev_dbg(&md->spi->dev, "panel already enabled\n");
+ mutex_unlock(&md->mutex);
+ return 0;
+ }
+
+ /*
+ * We have to meet all the following delay requirements:
+ * 1. tRW: reset pulse width 10usec (7.12.1)
+ * 2. tRT: reset cancel time 5msec (7.12.1)
+ * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+ * case (7.6.2)
+ * 4. 120msec before the sleep out command (7.12.1)
+ */
+ msleep(120);
+
+ set_sleep_mode(md, 0);
+ md->enabled = 1;
+
+ /* 5msec between sleep out and the next command. (8.2.16) */
+ msleep(5);
+ set_display_state(md, 1);
+ set_cabc_mode(md, md->cabc_mode);
+
+ mutex_unlock(&md->mutex);
+
+ return acx565akm_bl_update_status(md->bl_dev);
+fail:
+ omapdss_sdi_display_disable(dssdev);
+ return r;
+}
+
+static void acx_panel_power_off(struct omap_dss_device *dssdev)
+{
+ struct acx565akm_device *md = &acx_dev;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+
+ mutex_lock(&md->mutex);
+
+ if (!md->enabled) {
+ mutex_unlock(&md->mutex);
+ return;
+ }
+ set_display_state(md, 0);
+ set_sleep_mode(md, 1);
+ md->enabled = 0;
+ /*
+ * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+ * ~50msec) after sending the sleep in command and asserting the
+ * reset signal. We probably could assert the reset w/o the delay
+ * but we still delay to avoid possible artifacts. (7.6.1)
+ */
+ msleep(50);
+
+ if (dssdev->platform_disable)
+ dssdev->platform_disable(dssdev);
+
+ /* FIXME need to tweak this delay */
+ msleep(100);
+
+ omapdss_sdi_display_disable(dssdev);
+
+ mutex_unlock(&md->mutex);
+}
+
+static int acx_panel_enable(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ r = acx_panel_power_on(dssdev);
+
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return 0;
+}
+
+static void acx_panel_disable(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ acx_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static int acx_panel_suspend(struct omap_dss_device *dssdev)
+{
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ acx_panel_power_off(dssdev);
+ dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
+ return 0;
+}
+
+static int acx_panel_resume(struct omap_dss_device *dssdev)
+{
+ int r;
+
+ dev_dbg(&dssdev->dev, "%s\n", __func__);
+ r = acx_panel_power_on(dssdev);
+ if (r)
+ return r;
+
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ return 0;
+}
+
+static void acx_panel_set_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ int r;
+
+ if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE)
+ omapdss_sdi_display_disable(dssdev);
+
+ dssdev->panel.timings = *timings;
+
+ if (dssdev->state = OMAP_DSS_DISPLAY_ACTIVE) {
+ r = omapdss_sdi_display_enable(dssdev);
+ if (r)
+ dev_err(&dssdev->dev, "%s enable failed\n", __func__);
+ }
+}
+
+static void acx_panel_get_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ *timings = dssdev->panel.timings;
+}
+
+static int acx_panel_check_timings(struct omap_dss_device *dssdev,
+ struct omap_video_timings *timings)
+{
+ return 0;
+}
+
+
+static struct omap_dss_driver acx_panel_driver = {
+ .probe = acx_panel_probe,
+ .remove = acx_panel_remove,
+
+ .enable = acx_panel_enable,
+ .disable = acx_panel_disable,
+ .suspend = acx_panel_suspend,
+ .resume = acx_panel_resume,
+
+ .set_timings = acx_panel_set_timings,
+ .get_timings = acx_panel_get_timings,
+ .check_timings = acx_panel_check_timings,
+
+ .get_recommended_bpp = acx_get_recommended_bpp,
+
+ .driver = {
+ .name = "panel-acx565akm",
+ .owner = THIS_MODULE,
+ },
+};
+
+/*--------------------SPI probe-------------------------*/
+
+static int acx565akm_spi_probe(struct spi_device *spi)
+{
+ struct acx565akm_device *md = &acx_dev;
+
+ dev_dbg(&spi->dev, "%s\n", __func__);
+
+ spi->mode = SPI_MODE_3;
+ md->spi = spi;
+ mutex_init(&md->mutex);
+ dev_set_drvdata(&spi->dev, md);
+
+ omap_dss_register_driver(&acx_panel_driver);
+
+ return 0;
+}
+
+static int acx565akm_spi_remove(struct spi_device *spi)
+{
+ struct acx565akm_device *md = dev_get_drvdata(&spi->dev);
+
+ dev_dbg(&md->spi->dev, "%s\n", __func__);
+ omap_dss_unregister_driver(&acx_panel_driver);
+
+ return 0;
+}
+
+static struct spi_driver acx565akm_spi_driver = {
+ .driver = {
+ .name = "acx565akm",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = acx565akm_spi_probe,
+ .remove = __devexit_p(acx565akm_spi_remove),
+};
+
+static int __init acx565akm_init(void)
+{
+ return spi_register_driver(&acx565akm_spi_driver);
+}
+
+static void __exit acx565akm_exit(void)
+{
+ spi_unregister_driver(&acx565akm_spi_driver);
+}
+
+module_init(acx565akm_init);
+module_exit(acx565akm_exit);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");