Re: [PATCH 1/3] picolcd: driver for PicoLCD HID device

+#ifdef CONFIG_LOGO
+/*
+ * This is a default logo to be loaded upon driver initialization
+ * replacing the default PicoLCD image loaded on device
+ * initialization. This is to provide the user a cue that the
+ * Linux driver is loaded and ready.
+ *
+ * This logo contains the text PicoLCD in the center with one penguin
+ * on each side of the text. The penguins are a 64x64 rendition of
+ * the default framebuffer 80x80 monochrome image scaled down and
+ * cleaned up to retain something that looks a little better than
+ * a simple scaling.
+ *
+ * This logo is a simple xbm image created in GIMP and exported.
+ * To view the image copy the following two #defines plus the
+ * picolcd_bits to an ASCII text file and save with extension
+ * .xbm, then open with GIMP or any other graphical editor
+ * such as eog that recognizes the .xbm format.
+ */
+#define picolcd_width 256
+#define picolcd_height 64
+static const u8 picolcd_bits[PICOLCDFB_SIZE] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xf8, 0x1f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf8, 0x1f, 0xff, 0xff, 0xff,