radeonfb cannot map FB
flat view
From: Rui Santos <hidden>
Date: 2009-08-24 20:08:32
Dear Benjamin Herrenschmidt, dear mailing list subscribers,
I'm trying to load radeonfb for an RV100 QY chipset. Whatever I
type in the modprobe I always get:
radeonfb (0000:01:0c.0): cannot map FB
radeonfb: probe of 0000:01:0c.0 failed with error -5
I've tried latest 2.6.27.x and 2.6.30.x kernels. This a secondary
video card that I would like to connect a monitor to. The first video
card is an Intel 915G, which is working with vesafb.
Here is the output of lspci -vvv
01:0c.0 VGA compatible controller: ATI Technologies Inc Radeon RV100
QY [Radeon 7000/VE] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device 013b
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=mediumTAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at dc00 [size=256]
Region 2: Memory at fdee0000 (32-bit, non-prefetchable)
[size=64K]
[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel modules: radeonfb
Can you or anyone give a hint on what I might be doing wrong:
modprobe radeonfb mode_option=800x600-16 panel_yres=600
Or could this be some kind of hardware issue ?
Thanks a lot for your help,
Regards,
Rui Santos
http://www.ruisantos.com/
Veni, vidi, Linux!
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july