Ensure that the default display parameter passed in via the
device's platform data is valid. It turns out when mach-bast.c
was updated, the default_display was set outside of the display
array bounds, causing a panic on startup.

If the default_display is bigger than num_displays, then generate
an error and refuse to initialise the driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Index: linux-2.6.24-rc3-fb1/drivers/video/s3c2410fb.c
===================================================================

--- linux-2.6.24-rc3-fb1.orig/drivers/video/s3c2410fb.c
+++ linux-2.6.24-rc3-fb1/drivers/video/s3c2410fb.c

@@ -799,6 +799,12 @@ static int __init s3c2410fb_probe(struct
 		return -EINVAL;
 	}
 
+	if (mach_info->default_display >= mach_info->num_displays) {
+		dev_err(&pdev->dev, "default is %d but only %d displays\n",
+			mach_info->default_display, mach_info->num_displays);
+		return -EINVAL;
+	}
+
 	display = mach_info->displays + mach_info->default_display;
 
 	irq = platform_get_irq(pdev, 0);

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/