Re: framebuffer with nvidia 7600GS shows corrupt screen

From: Petr Vandrovec <redacted>
Date: Thu, May 24, 2007 at 01:57:16AM -0700

jurriaan wrote:

quoted

I've swapped my nvidia 6600 for a 7600GS, because it has dual-link DVI
output. That broke my framebuffer!

If I boot like this:

Command line: root=/dev/md2 video=nvidiafb:640x480-32@60 atkbd.softrepeat=1

I see this:

nvidiafb: Device ID: 10de0392 
nvidiafb: CRTC0 analog found
nvidiafb: CRTC1 analog not found
nvidiafb: EDID found from BUS1

Mmm, and what you have connected to that dual-link DVI output?  It looks 
like that framebuffer believes that you've connected analog monitor to 
it, which I'm not sure is quite correct given your note that you 
upgraded to get dual link DVI.  You may want to hardcode values for 
FlatPanel & CRTCNumber into NVCommonSetup instead of allowing 
autodetection...

I haven't yet - a plain old CRT monitor is attached currently. I haven't
bought a LCD yet. The messages seem correct. The monitor is attached via
a dvi->vga15 converter, of which I've tried two known working ones.

Thanks,
Jurriaan
-- 
+#if defined(__alpha__) && defined(CONFIG_PCI)
+       /*
+        * The meaning of life, the universe, and everything. Plus
+        * this makes the year come out right.
+        */
+       year -= 42;
+#endif
	From the patch for 1.3.2: (kernel/time.c), submitted by Marcus Meissner
Debian (Unstable) GNU/Linux 2.6.21-mm2 2x2010 bogomips load 4.21
the Jack Vance Integral Edition: http://www.integralarchive.org

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/