On Thu, 2007-02-22 at 16:55 +0100, Giuseppe Bilotta wrote:

On 2/22/07, Antonino A. Daplas [off-list ref] wrote:
However, I'm still getting the same snowy effects, which doesn't come
as a surprise since the actual mode timings used are just the same ...

BTW, you can also use CVT modes for nvidiafb, even if the mode in
question is not present in the EDID block.  For example:

video=nvidiafb:1024x768M@60 or 1600x1200M@60 

(The 'M' tells fb_find_mode to do a CVT calculation instead).

If you use a reduced-blanking CVT mode, it might even reduce the snow of
your DVI even at the highest resolution.  So:

video=nvidiafb:1600x1200MR@60

(The additional 'R' will do reduced-blanking CVT calculation)

Tony