On 2/22/07, Antonino A. Daplas [off-list ref] wrote:

On Wed, 2007-02-07 at 00:08 +0100, Giuseppe Bilotta wrote:

quoted

As mentioned in another post in this thread, I can't get any info out
of the i2c busses, because even when I have them available (i.e. after
loading nvidiafb) I get XXXX all around (on all three of them).
Suggestions on how to get the information welcome.

Is this the same monitor you posted here?

http://marc.theaimsgroup.com/?l=linux-kernel&m=112807065616218&w=2

If yes, we already have the manufacturer and model code. The main
problem is that the EDID of this display has no sync range (H: 75-75kHz
and V: 60-60Hz).  Extending Hsync from 30-75kHz as a fix to the EDID
block shouldn't be too hard.

Yes, that's it! Jeepers, I can't believe that even re-reading the past
LKML posts (even those!) I couldn't find the EDID info and how we had
gotten them. I guess I need stronger glasses.

Wonder why Luca's proposed patch makes the EDID undetectable, now, and
why can't it be retrieved at a later time via i2c. Timeouts too small?

I already have a patch for this which I forgot to send to you
before :-).  If you can confirm that this is still the same hardware,
I'll send you a test patch

Yes, it's the same hardware. I can try the patch, with or without Luca's.


-- 
Giuseppe "Oblomov" Bilotta