Re: [Linux-fbdev-devel] radeonfb: Can't use the dvi port

Started by Benjamin Herrenschmidt on Feb 4, 2007 · 2 messages from 2 authors · Last reply Feb 6, 2007

open the first message on its own page

Message details and related content
I`ve compiled raeonfb debug in the kernel:
Dec 26 14:52:05 frodo kernel: hStart = 1664, hEnd = 1856, hTotal = 2160
Dec 26 14:52:05 frodo kernel: vStart = 1201, vEnd = 1204, vTotal = 1250
Dec 26 14:52:05 frodo kernel: h_total_disp = 0xc7010d hsync_strt_wid = 0x18067a
Dec 26 14:52:05 frodo kernel: v_total_disp = 0x4af04e1 vsync_strt_wid = 0x304b0
Dec 26 14:52:05 frodo kernel: pixclock = 6172
Dec 26 14:52:05 frodo kernel: freq = 16202
Dec 26 14:52:05 frodo kernel: freq = 16202, PLL min = 20000, PLL max = 40000
Dec 26 14:52:05 frodo kernel: ref_div = 12, ref_clk = 2700, output_freq = 32404
Dec 26 14:52:05 frodo kernel: ref_div = 12, ref_clk = 2700, output_freq = 32404
Dec 26 14:52:05 frodo kernel: post div = 0x1
Dec 26 14:52:05 frodo kernel: fb_div = 0x90
Dec 26 14:52:05 frodo kernel: ppll_div_3 = 0x10090

My card:
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)

Switching to the analog port works well.
Can I have the -full- dmesg log ?

Ben.



-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642

Re: UNS: Re: [Linux-fbdev-devel] radeonfb: Can't use the dvi port

Message details and related content
On Mon, 05 Feb 2007 the mental interface of
Benjamin Herrenschmidt told:

[...]
quoted
Switching to the analog port works well.
Can I have the -full- dmesg log ?
Yep and thanks ;)

This is trying dvi but switching to analog while booting:

radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=275.00 Mhz, System=250.00 MHz
radeonfb: PLL min 20000 max 40000
1 chips in connector info
 - chip 1 has 2 connectors
  * connector 0 of type 2 (CRT) : 2300
  * connector 1 of type 3 (DVI-I) : 3201
Starting monitor auto detection...
radeonfb: I2C (port 1) ... not found
radeonfb: I2C (port 2) ... found TMDS panel
radeonfb: I2C (port 3) ... found CRT display
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
i2c_adapter i2c-3: unable to read EDID block.
radeonfb: I2C (port 4) ... not found
radeonfb: I2C (port 2) ... found TMDS panel
radeonfb: I2C (port 3) ... found CRT display
radeonfb: Monitor 1 type DFP found
radeonfb: EDID probed
radeonfb: Monitor 2 type CRT found
radeonfb: EDID probed
Parsing EDID data for panel info
Setting up default mode based on panel info
hStart = 1664, hEnd = 1856, hTotal = 2160
vStart = 1201, vEnd = 1204, vTotal = 1250
h_total_disp = 0xc7010d	   hsync_strt_wid = 0x18067a
v_total_disp = 0x4af04e1	   vsync_strt_wid = 0x304b0
pixclock = 6172
freq = 16202
freq = 16202, PLL min = 20000, PLL max = 40000
ref_div = 12, ref_clk = 2700, output_freq = 32404
ref_div = 12, ref_clk = 2700, output_freq = 32404
post div = 0x1
fb_div = 0x90

348 more lines

Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help