J jurriaan #
Message details and related content
After updating from 2.6.13-rc4-mm1 to 2.6.14-rc1-mm1 I see no cursor on
my console.
Bootdata ok (command line is root=/dev/md2 video=nvidiafb:1600x1200-16@85 atkbd.softrepeat=1)
Linux version 2.6.14-rc1-mm1 (jurriaan@middle) (gcc version 4.0.2 20050913 (prerelease) (Debian 4.0.1-7)) #3 Sun Sep 18 15:31:55 CEST 2005
Kernel command line: root=/dev/md2 video=nvidiafb:1600x1200-16@85 atkbd.softrepeat=1
nvidiafb: nVidia device/chipset 10DE0141
nvidiafb: CRTC0 found
nvidiafb: CRTC1 found
nvidiafb: EDID found from BUS2
nvidiafb: CRTC 0 appears to have a CRT attached
nvidiafb: Using CRT on CRTC 0
nvidiafb: MTRR set to ON
Console: switching to colour frame buffer device 133x54
nvidiafb: PCI nVidia NV14 framebuffer (64MB @ 0xC0000000)
hardware: XFX 6600 pci-e card:
0000:01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2) (prog-if 00 [VGA])
Flags: bus master, fast devsel, latency 0, IRQ 217
Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d4000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at d5000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Capabilities: [78] #10 [0001]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14-rc1-mm1
# Sun Sep 18 15:31:28 2005
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y