M Martin MOKREJŠ #
Message details and related content
Hi, I get with 2.6.13-rc7 on one server motherboard the following with ACPI enabled (haven't tried without): Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 3.00 entry at 0xfd663, last bus=9 PCI: Using MMCONFIG ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:08:01.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE1A.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3A._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE3B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *9 ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401 pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:01:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: d0100000-d01fffff PREFETCH window: d8000000-dfffffff PCI: Bridge: 0000:00:1e.0 IO window: 3000-3fff MEM window: d0200000-d02fffff PREFETCH window: d0300000-d03fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 Simple Boot Flag at 0x3a set to 0x1 Machine check exception polling timer started. IA-32 Microcode Update Driver: v1.14 [off-list ref] highmem bounce pool size: 64 pages SGI XFS with no debug enabled Initializing Cryptographic API radeonfb_pci_register BEGIN ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 24 (level, low) -> IRQ 17 radeonfb (0000:08:01.0): Found 0k of DDR 32 bits wide videoram radeonfb (0000:08:01.0): cannot map FB ACPI: PCI interrupt for device 0000:08:01.0 disabled radeonfb: probe of 0000:08:01.0 failed with error -5 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: CPU1 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 8 throttling states) Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds). Hangcheck: Using monotonic_clock(). PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 Is this known? Please Cc: me in replies. ;) 0000:00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c) 0000:00:00.1 Class ff00: Intel Corporation E7525/E7520 Error Reporting Registers (rev 0c)00GHz GenuineIntel GNU/Linux 0000:00:01.0 System peripheral: Intel Corporation E7520 DMA Controller (rev 0c) 0000:00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) 0000:00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c) 0000:00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 0c) 0000:00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c) 0000:00:07.0 PCI bridge: Intel Corporation E7520 PCI Express Port C1 (rev 0c) 0000:00:1c.0 PCI bridge: Intel Corporation 6300ESB 64-bit PCI-X Bridge (rev 02) 0000:00:1d.0 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) 0000:00:1d.1 USB Controller: Intel Corporation 6300ESB USB Universal Host Controller (rev 02) 0000:00:1d.4 System peripheral: Intel Corporation 6300ESB Watchdog Timer (rev 02) 0000:00:1d.5 PIC: Intel Corporation 6300ESB I/O Advanced Programmable Interrupt Controller (rev 02) 0000:00:1d.7 USB Controller: Intel Corporation 6300ESB USB2 Enhanced Host Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 0a) 0000:00:1f.0 ISA bridge: Intel Corporation 6300ESB LPC Interface Controller (rev 02) 0000:00:1f.1 IDE interface: Intel Corporation 6300ESB PATA Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corporation 6300ESB SATA Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corporation 6300ESB SMBus Controller (rev 02) 0000:01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) 0000:01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) 0000:08:01.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] 0000:08:02.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller 0000:08:03.0 Ethernet controller: Intel Corporation 82541GI/PI Gigabit Ethernet Controller 0000:09:01.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controller (rev 05) http://www.msicomputer.com/product/p_spec.asp?model=E7520_Master-S2M&class=spd BIOS is 1.20 M. ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf