i810fb: Module param fix

Started by Antonino A. Daplas on Jan 13, 2005

Subsystems (2)

Maintainers (2)

DORMANTno replies

open the first message on its own page

Message details and related content
  Last parameter is file permition in sysfs, not default value.
  (If 0, file is not accessible trough sysfs, and that's what i did.)


Signed-off-by: Domen Puncer <redacted>
Signed-off-by: Antonino Daplas <redacted>
---

 i810_main.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff -Nru a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
--- a/drivers/video/i810/i810_main.c	2005-01-12 06:10:17 +08:00
+++ b/drivers/video/i810/i810_main.c	2004-12-29 17:43:05 +08:00
@@ -2003,20 +2003,20 @@
 	return pci_register_driver(&i810fb_driver);
 }
 
-module_param(vram, int, 4);
+module_param(vram, int, 0);
 MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB" 
 		 " (default=4)");
 module_param(voffset, int, 0);
 MODULE_PARM_DESC(voffset, "at what offset to place start of framebuffer "
                  "memory (0 to maximum aperture size), in MiB (default = 48)");
-module_param(bpp, int, 8);
+module_param(bpp, int, 0);
 MODULE_PARM_DESC(bpp, "Color depth for display in bits per pixel"
 		 " (default = 8)");
-module_param(xres, int, 640);
+module_param(xres, int, 0);
 MODULE_PARM_DESC(xres, "Horizontal resolution in pixels (default = 640)");
-module_param(yres, int, 480);
+module_param(yres, int, 0);
 MODULE_PARM_DESC(yres, "Vertical resolution in scanlines (default = 480)");
-module_param(vyres,int, 480);
+module_param(vyres,int, 0);
 MODULE_PARM_DESC(vyres, "Virtual vertical resolution in scanlines"
 		 " (default = 480)");
 module_param(hsync1, int, 0);




-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help