Re: Rivafb won't work with DVI connector

--- Andrew Walrond <andrew@walrond.org> wrote:

On Tuesday 23 Nov 2004 18:26, Antonino A. Daplas
wrote:

quoted

Does vesafb work in x86_64?  If it does you can

add this in your

quoted

commandline:

vga=0x307

0x306 is the code for 1280x1024, see

Documentation/fb/vesafb.txt.

quoted

Then check your dmesg if the panel size also

changed.  If it did, then

quoted

you can do this:

vga=0x307 video=nvidiafb:1280x1024@60.

If I did this right, it doesn't help. I built in the
vesafb as well as your 
new nvidafb, then booted with the commandline

 vga=0x31b video=nvidiafb:1280x1024-32@60

That's assuming 0x31b is supported by your card.  Why not
try:

vga=ask

Choose 'scan', choose the highest size, and check if the panel
size changed again.

It looks like the nvidafb got the first bite of the
cherry:

No, vesafb will always get the first bite, it's initialized when the OS is in
real mode.

 ...
 nvidiafb: CRTC 1 is currently programmed for DFP
 nvidiafb: Using DFP on CRTC 1
 Panel size is 1024 x 768
 nvidiafb: MTRR set to ON
 Console: switching to colour frame buffer device
128x48
 nvidiafb: PCI nVidia NV25 framebuffer (128MB @
0xE0000000)
 vesafb: probe of vesafb0 failed with error -6
 ...


Do you know if the nvidia developers lurk on lkml? I

I did not subscribe to lkml.  But I do occassionally look at the archives.

seem to remember somebody 
saying that they do. If so, is it worth asking them
for a bit of help with 
this? I know they're not about to open source their
binary driver due to ip 
license problems, but the information we require to
overcome this problem in 
the fb driver is probably quite trivial in nature. I

Well, checking the latest Xorg again, it seems that the nv driver also
depends on the BIOS for the panel size.  And they are the people who does
have access to the docs.

assume they have been 
forthcoming in the past wrt the open source X
driver.

What do you think? Worth asking?

Sure, no harm in asking.  But I would rather ask the Xorg people first.  If
we can't get the vga=ask to work, then I really don't know what to do,
besides perhaps experimenting with VBE calls.  I can  do that, but I do not
have any flatpanel to test on.

Tony




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/