Re: Dual screen framebuffer development advice

I asked this a few months ago:

On Saturday 19 Jun 2004 21:25, Antonino A. Daplas wrote:

On Saturday 19 June 2004 21:55, Andrew Walrond wrote:

quoted

I need to setup a machine to develop a framebuffer based application. I'd
like to use two graphics devices; The first an ati agp chipset on the
motherboard which will run X11 with X11's ati driver, the second a PCI
card running a fb driver and displaying my framebuffer application.

Is this possible/sensible?

Sure, it's possible and actually not hard to do.  Just make sure that the
driver of your primary card is fbdev, and the secondary X11.  X happens to
do a fine job of initializing non-primary cards whereas fbdev is mostly
restricted to cards initialized by the firmware.

I've got this working nicely now. I have a recent agp nvidia card and an old 
pci matrox millenium in this dual opteron machine running 64bit linux. I boot 
into a console on the matrox using the built-in matroxfb driver, then startx 
which runs on the nvidia card using the nv driver. I can then work on my fb 
application in X, viewing the output on the second monitor via the matrox 
card. Nice!

Note: You wont' be able to see both displays simultaneously, switching from
one blanks the other.   If you do want multi-seat, see the Ruby project of
linuxconsole.

This is wrong; I can indeed see both displays simultaneously :)

The matrox fb is pretty slow (being on a pci bus); it can only manage 5fps at 
1600x1200-16bpp. The rivafb is much faster (36fps) so I might try switching 
roles (X on matrox, fb on nvidia) at some point. I think X might accelerate 
the matrox card quite well enough for running xemacs etc.

Andrew Walrond


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/