fbdev: Convert MODULE_PARM to module_param in i810fb

Started by Antonino A. Daplas on Oct 29, 2004

Subsystems (2)

Maintainers (2)

DORMANTno replies

open the first message on its own page

Message details and related content
Convert MODULE_PARM to module_param in i810fb

Signed-off-by: Antonino Daplas <redacted>
---
 i810_main.c |   30 +++++++++++++++---------------
 1 files changed, 15 insertions(+), 15 deletions(-)

diff -Nru a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
--- a/drivers/video/i810/i810_main.c	2004-10-27 16:28:37 +08:00
+++ b/drivers/video/i810/i810_main.c	2004-10-28 20:22:51 +08:00
@@ -1994,44 +1994,44 @@
 	return pci_register_driver(&i810fb_driver);
 }
 
-MODULE_PARM(vram, "i");
+module_param(vram, int, 4);
 MODULE_PARM_DESC(vram, "System RAM to allocate to framebuffer in MiB" 
 		 " (default=4)");
-MODULE_PARM(voffset, "i");
+module_param(voffset, int, 0);
 MODULE_PARM_DESC(voffset, "at what offset to place start of framebuffer "
                  "memory (0 to maximum aperture size), in MiB (default = 48)");
-MODULE_PARM(bpp, "i");
+module_param(bpp, int, 8);
 MODULE_PARM_DESC(bpp, "Color depth for display in bits per pixel"
 		 " (default = 8)");
-MODULE_PARM(xres, "i");
+module_param(xres, int, 640);
 MODULE_PARM_DESC(xres, "Horizontal resolution in pixels (default = 640)");
-MODULE_PARM(yres, "i");
+module_param(yres, int, 480);
 MODULE_PARM_DESC(yres, "Vertical resolution in scanlines (default = 480)");
-MODULE_PARM(vyres, "i");
+module_param(vyres,int, 480);
 MODULE_PARM_DESC(vyres, "Virtual vertical resolution in scanlines"
 		 " (default = 480)");
-MODULE_PARM(hsync1, "i");
+module_param(hsync1, int, 0);
 MODULE_PARM_DESC(hsync1, "Minimum horizontal frequency of monitor in KHz"
 		 " (default = 31)");
-MODULE_PARM(hsync2, "i");
+module_param(hsync2, int, 0);
 MODULE_PARM_DESC(hsync2, "Maximum horizontal frequency of monitor in KHz"
 		 " (default = 31)");
-MODULE_PARM(vsync1, "i");
+module_param(vsync1, int, 0);
 MODULE_PARM_DESC(vsync1, "Minimum vertical frequency of monitor in Hz"
 		 " (default = 50)");
-MODULE_PARM(vsync2, "i");
+module_param(vsync2, int, 0);
 MODULE_PARM_DESC(vsync2, "Maximum vertical frequency of monitor in Hz" 
 		 " (default = 60)");
-MODULE_PARM(accel, "i");
+module_param(accel, bool, 0);
 MODULE_PARM_DESC(accel, "Use Acceleration (BLIT) engine (default = 0)");
-MODULE_PARM(mtrr, "i");
+module_param(mtrr, bool, 0);
 MODULE_PARM_DESC(mtrr, "Use MTRR (default = 0)");
-MODULE_PARM(ext_vga, "i");
+module_param(ext_vga, bool, 0);
 MODULE_PARM_DESC(ext_vga, "Enable external VGA connector (default = 0)");
-MODULE_PARM(sync, "i");
+module_param(sync, bool, 0);
 MODULE_PARM_DESC(sync, "wait for accel engine to finish drawing"
 		 " (default = 0)");
-MODULE_PARM(dcolor, "i");
+module_param(dcolor, bool, 0);
 MODULE_PARM_DESC(dcolor, "use DirectColor visuals"
 		 " (default = 0 = TrueColor)");
 




-------------------------------------------------------
This Newsletter Sponsored by: Macrovision 
For reliable Linux application installations, use the industry's leading
setup authoring tool, InstallShield X. Learn more and evaluate 
today. http://clk.atdmt.com/MSI/go/ins0030000001msi/direct/01/
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help