Re: Mach64 GX driver problems in post 2.4.22 kernels

Hi again,

On 06/05/04 20:56:47, Thomas Jahns wrote:

quoted

dmesg | grep -i \(aty\|console\)

Kernel command line: root=/dev/sda7 video=atyfb:vmode:18:cmode:8  
panic=60
Console: colour dummy device 80x25
atyfb: mach64GX (ATI888GX00) [0x00d7 rev 0x03] 4M VRAM, 14.31818 MHz  
XTAL, 135
MHz PLL, 50 Mhz MCLK
Console: switching to colour frame buffer device 144x54
fb0: ATY Mach64 frame buffer device on PCI
MacOS display is /bandit/ATY,mach64

classic error, the above line reads the same as that below because copy  
and paste swallowed exactly the part of the line which is different, so  
here it comes again (now hopefully complete):

atyfb: mach64GX (ATI888GX00) [0x00d7 rev 0x03] 4M VRAM, 14.31818 MHz  
XTAL, 135 MHz PLL, 50 Mhz MCLK, 50 Mhz XCLK

I noticed one of these lines reads differently on my 2.4.22 kernel:

atyfb: mach64GX (ATI888GX00) [0x00d7 rev 0x03] 4M VRAM, 14.31818 MHz
XTAL, 135 MHz PLL, 50 Mhz MCLK

                                 ^^^^^^^^^^^

Ciao, Thomas Jahns
-- 
"Computers are good at following instructions,
 but not at reading your mind."
D. E. Knuth, The TeXbook, Addison-Wesley 1984, 1986, 1996, p. 9


-------------------------------------------------------
This SF.Net email is sponsored by the new InstallShield X.
From Windows to Linux, servers to mobile, InstallShield X is the one
installation-authoring solution that does it all. Learn more and
evaluate today! http://www.installshield.com/Dev2Dev/0504