Re: ATI Rage XL biosless init

I cross posted this to see if anyone else ran into this problem. I went 
looking for for Rage XL card last night but couldn't find it. I will look 
for it tonight. 

The result of your patch.

atyfb: 3D RAGE (XL PCI-33MHz) [0x4752 rev 0x27] 512K SGRAM, 14.31818 MHz
XTAL, 230 MHz PLL, 83 Mhz MCLK, 63 MHz XCLK
atyfb: Unsupported xclk source:  5.
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
not enough video RAM
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
not enough video RAM
atyfb: vclk out of range
not enough video RAM
atyfb: vclk out of range
not enough video RAM
atyfb: vclk out of range
not enough video RAM
not enough video RAM
atyfb: vclk out of range
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
not enough video RAM
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: vclk out of range
atyfb: can't set default video mode


the result for patch I manual changed from 2.4.22.
atyfb: 3D RAGE (XL PCI-33MHz) [0x4752 rev 0x27] 8M WRAM, 14.31818 MHz XTAL,
230 MHz PLL, 83 Mhz MCLK, 63 Mhz XCLK
fb0: ATY Mach64 frame buffer device on PCI

It seems that the RAM recognized is different.

-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click