Merge of Luca and Ben's sysfs work for Radeon
flat view
From: Jon Smirl <hidden>
Date: 2003-09-25 06:05:25
Here is a sample of what sysfs looks like with the new radeon driver. I have an Intel 875 chipset so there are three buses: 0 - system, 1 - AGP, 2 - PCI. Note that the EDID block is available. I was thinking about adding these attributes to the fb device: geometry, timings, interlaced, hsync, vsync. and then writing a new fbset command. [jonsmirl@smirl sys]$ ls block bus cdev class devices firmware power [jonsmirl@smirl sys]$ ls bus/pci/devices 0000:00:00.0 0000:00:1d.1 0000:00:1d.7 0000:00:1f.1 0000:00:1f.5 0000:02:01.0 0000:00:01.0 0000:00:1d.2 0000:00:1e.0 0000:00:1f.2 0000:01:00.0 0000:02:02.0 0000:00:1d.0 0000:00:1d.3 0000:00:1f.0 0000:00:1f.3 0000:01:00.1 0000:02:0c.0 [jonsmirl@smirl sys]$ ls bus/pci/drivers agpgart-intel Intel ICH parport_pc radeonfb uhci-hcd e1000 Intel ICH Joystick PCI IDE RZ1000 IDE ehci_hcd ohci1394 PIIX IDE serial [jonsmirl@smirl sys]$ ls bus/pci/drivers/radeonfb 0000:01:00.0 0000:01:00.1 new_id [jonsmirl@smirl sys]$ ls class graphics i2c-adapter input net scsi_device scsi_host tty usb usb_host [jonsmirl@smirl sys]$ ls class/graphics fb0 [jonsmirl@smirl sys]$ ls class/graphics/fb0 dev device driver [jonsmirl@smirl sys]$ ls class/graphics/fb0/device class detach_state edid1 i2c-1 i2c-3 power subsystem_device vendor config device i2c-0 i2c-2 irq resource subsystem_vendor [jonsmirl@smirl sys]$ ls class/graphics/fb0/driver 0000:01:00.0 0000:01:00.1 new_id [jonsmirl@smirl sys]$ ===== Jon Smirl jonsmirl@yahoo.com __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf