2.5.60/atyfb

Hello!

I retried using atyfb with 2.5.60:
Afterloading atyfb the only thing left is the cursor.
i don't see anything else anymore..i see the cursor moving, but that's all.
btw, i am using a laptop (means lcd)...

can somebody tell me whether playing around with fbset could make things
working?

Nico

lspci:
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage P/M Mobility AGP 2x (rev 64)

dmesg:
atyfb: 3D RAGE Mobility (PCI) [0x4c4d rev 0x64] 8M SDRAM, 29.498928 MHz XTAL, 230 MHz PLL, 50 Mhz MCLK
fb0: ATY Mach64 frame buffer device on PCI

flapp:~ # fbset -fb /dev/fb/0 

mode "640x480-60"
    # D: 25.075 MHz, H: 31.343 kHz, V: 59.701 Hz
    geometry 640 480 640 13075 8
    timings 39881 48 16 33 10 96 2
    accel true
    rgba 8/0,8/0,8/0,0/0
endmode


flapp:~ # fbset -fb /dev/fb/0 -xres 1024 -yres 768
dmesg:
not enough video RAM

flapp:~ # fbset -fb /dev/fb/0 -xres 800 -yres 600
dmesg:
not enough video RAM

-- 
Please send your messages pgp-signed and/or pgp-encrypted (don't encrypt mails
to mailing list!). If you don't know what pgp is visit www.gnupg.org.
(public pgp key: ftp.schottelius.org/pub/familiy/nico/pgp-key)