Re: (no subject)

On Thu, 2003-02-06 at 23:27, p.gilardetti@libero.it wrote:

Hi,
I have a problem when I change the bpp value, here is the code:

if( ioctl(fbd, FBIOGET_VSCREENINFO, &var_info) == -1){
	perror("\nError IOCTL 1");
	exit(0);
}           
printf("\n bpp: %d", var_info.bits_per_pixel);   // output is  bpp: 16
var_info.bits_per_pixel = 24;
if( ioctl(fbd, FBIOPUT_VSCREENINFO, &var_info) == -1){
	perror("\nError IOCTL 2");
	exit(0);
}           
The program exit with the following message error: 
Error IOCTL 2: Invalid argument

How can I set the bpp value? Should I modify the file /etc/X11/XF86Config?

This will depend on the driver you are using.  vesafb does not support
any change to fb_var_screeninfo.  Other drivers, may not round off
invalid values:  ie bpp == 24 is not supported.  Also, increasing bpp
implies that more video memory will be required if var.xres_virtual and
var.yres_virtual remains the same.  So try to check xres, yres,
xres_virtual and yres_virtual against fix.smem_len and
var.bits_per_pixel.  

fix.smem_len >= (var.bits_per_pixel * var.xres_virtual)/8 *
var.yres_virtual.

/etc/X11/XF86Config has nothing to with fbdev.

I have another problem, I try to write a simple program that reads frame from framebuffer and then creates a Divx file of a few seconds.
I map the framebuffer to a buffer, but the program crash with a segmentation fault:
                                                 
    screen_buffer = (char *)malloc(DIM_BUFFER * sizeof(char));

you don't need this step.

    screen_buffer = (void *)mmap(0, DIM_BUFFER, PROT_READ, MAP_SHARED, fbd, 0);                 

check if mmap failed, (returns -1).

	
    encFrame.image = (void *)screen_buffer;  <--- causes seg fault

memcpy(encFrame.image, screen_bufer, DIM_BUFFER) is a more appropriate
step to get the contents.

Tony




-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com