[PATCH v4 3/6] dt-bindings: hwmon: Add Sensylink CTF2301

Add the Sensylink CTF2301 temperature sensor and fan controller to the
LM63 family binding. The chip follows the LM63 register model and can
provide a thermal cooling device when #cooling-cells is present.

Do not provide a national,lm63 fallback because the CTF2301 is not fully
compatible with LM63. It uses different conversion-rate encodings,
extended local-temperature registers, additional fan lookup table
entries, and device-specific PWM and ALERT/TACH configuration. An older
LM63 driver would therefore not operate the device correctly.

Acked-by: Krzysztof Kozlowski <redacted>
Signed-off-by: Troy Mitchell <redacted>
---
 Documentation/devicetree/bindings/hwmon/national,lm63.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwmon/national,lm63.yaml b/Documentation/devicetree/bindings/hwmon/national,lm63.yaml
index f2e0993cfbef..4c8d0a15fbd1 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm63.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm63.yaml

@@ -12,7 +12,8 @@ maintainers:
 description: |
   The LM63 family provides local and remote temperature monitoring together
   with fan speed monitoring and PWM fan control. Supported devices include
-  the National Semiconductor LM63, LM64 and LM96163.
+  the National Semiconductor LM63, LM64 and LM96163, and the Sensylink
+  CTF2301.
 
 allOf:
   - $ref: hwmon-common.yaml#

@@ -23,6 +24,7 @@ properties:
       - national,lm63
       - national,lm64
       - national,lm96163
+      - sensylink,ctf2301
 
   reg:
     maxItems: 1

-- 
2.55.0