[PATCH v7 3/8] dt-bindings: iio: adc: adi,ad4030: Add PWM
From: Marcelo Schmitt <marcelo.schmitt@analog.com>
Date: 2026-02-05 16:48:21
Also in:
linux-devicetree, linux-iio, lkml
Subsystem:
ad4030 adc driver (ad4030-24/ad4630-16/ad4630-24/ad4632-16/ad4632-24), analog devices inc iio drivers, iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Hennerich, Nuno Sá, Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
In setups designed for high speed data rate capture, a PWM is used to generate the CNV signal that issues data captures from the ADC. Document the use of a PWM for AD4030 and similar devices. Reviewed-by: David Lechner <dlechner@baylibre.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com> --- Change log v6 -> v7 - No changes. Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
index a8fee4062d0e..564b6f67a96e 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad4030.yaml@@ -64,6 +64,10 @@ properties: The Reset Input (/RST). Used for asynchronous device reset. maxItems: 1 + pwms: + description: PWM signal connected to the CNV pin. + maxItems: 1 + interrupts: description: The BUSY pin is used to signal that the conversions results are available
--
2.39.2