[PATCH] Documentation: Remove repeated word in docs
From: Charles Han <hidden>
Date: 2025-02-06 09:16:56
Also in:
linux-can, linux-devicetree, linux-xfs, lkml
Subsystem:
can network drivers, documentation, mcp251xfd spi-can network driver, open firmware and flattened device tree bindings, the rest, xfs filesystem · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Jonathan Corbet, Manivannan Sadhasivam, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Carlos Maiolino
Remove the repeated word "to" docs. Signed-off-by: Charles Han <redacted> --- .../devicetree/bindings/net/can/microchip,mcp251xfd.yaml | 2 +- Documentation/filesystems/xfs/xfs-online-fsck-design.rst | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
index 2a98b26630cb..c155c9c6db39 100644
--- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml
+++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml@@ -40,7 +40,7 @@ properties: microchip,rx-int-gpios: description: - GPIO phandle of GPIO connected to to INT1 pin of the MCP251XFD, which + GPIO phandle of GPIO connected to INT1 pin of the MCP251XFD, which signals a pending RX interrupt. maxItems: 1
diff --git a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
index 12aa63840830..994f9e5638ee 100644
--- a/Documentation/filesystems/xfs/xfs-online-fsck-design.rst
+++ b/Documentation/filesystems/xfs/xfs-online-fsck-design.rst@@ -4521,7 +4521,7 @@ Both online and offline repair can use this strategy. | For this second effort, the ondisk parent pointer format as originally | | proposed was ``(parent_inum, parent_gen, dirent_pos) → (dirent_name)``. | | The format was changed during development to eliminate the requirement | -| of repair tools needing to to ensure that the ``dirent_pos`` field | +| of repair tools needing to ensure that the ``dirent_pos`` field | | always matched when reconstructing a directory. | | | | There were a few other ways to have solved that problem: |
--
2.43.0