[PATCH v2 4/6] Documentation: coresight: Turn numbered subsections into real subsections
From: James Clark <hidden>
Date: 2022-01-13 09:11:24
Also in:
linux-arm-kernel, linux-perf-users, lkml
Subsystem:
arm/coresight framework and drivers, documentation, the rest, tracing · Maintainers:
Suzuki K Poulose, Jonathan Corbet, Linus Torvalds, Steven Rostedt, Masami Hiramatsu
This is to allow them to be referenced in a later commit. There was also a mistake where sysFS was introduced as section 2, but numbered as section 1. And vice versa for 'Using perf framework'. This can't happen with unnumbered sections. Signed-off-by: James Clark <redacted> --- Documentation/trace/coresight/coresight.rst | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/Documentation/trace/coresight/coresight.rst b/Documentation/trace/coresight/coresight.rst
index a15571d96cc8..db66ff45ff4c 100644
--- a/Documentation/trace/coresight/coresight.rst
+++ b/Documentation/trace/coresight/coresight.rst@@ -339,7 +339,8 @@ Preference is given to the former as using the sysFS interface requires a deep understanding of the Coresight HW. The following sections provide details on using both methods. -1) Using the sysFS interface: +Using the sysFS interface +~~~~~~~~~~~~~~~~~~~~~~~~~ Before trace collection can start, a coresight sink needs to be identified. There is no limit on the amount of sinks (nor sources) that can be enabled at
@@ -446,7 +447,8 @@ wealth of possibilities that coresight provides. Instruction 0 0x8026B588 E8BD8000 true LDM sp!,{pc} Timestamp Timestamp: 17107041535 -2) Using perf framework: +Using perf framework +~~~~~~~~~~~~~~~~~~~~ Coresight tracers are represented using the Perf framework's Performance Monitoring Unit (PMU) abstraction. As such the perf framework takes charge of
@@ -495,7 +497,11 @@ More information on the above and other example on how to use Coresight with the perf tools can be found in the "HOWTO.md" file of the openCSD gitHub repository [#third]_. -2.1) AutoFDO analysis using the perf tools: +Advanced perf framework usage +----------------------------- + +AutoFDO analysis using the perf tools +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ perf can be used to record and analyze trace of programs.
@@ -513,7 +519,8 @@ The --itrace option controls the type and frequency of synthesized events Note that only 64-bit programs are currently supported - further work is required to support instruction decode of 32-bit Arm programs. -2.2) Tracing PID +Tracing PID +~~~~~~~~~~~ The kernel can be built to write the PID value into the PE ContextID registers. For a kernel running at EL1, the PID is stored in CONTEXTIDR_EL1. A PE may
@@ -547,7 +554,7 @@ wants to trace PIDs for both host and guest, the two configs "contextid1" and Generating coverage files for Feedback Directed Optimization: AutoFDO ---------------------------------------------------------------------- +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 'perf inject' accepts the --itrace option in which case tracing data is removed and replaced with the synthesized events. e.g.
--
2.28.0