[PATCH 4/5] docs: hwmon: tmp103.rst: fix bad usage of UTF-8 chars
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Date: 2021-05-11 15:01:51
Also in:
linux-hwmon, lkml
Subsystem:
documentation, hardware monitoring, the rest · Maintainers:
Jonathan Corbet, Guenter Roeck, Linus Torvalds
While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:
- U+2013 ('–'): EN DASH
In this specific case, EN DASH was used instead of a minus
sign. So, replace it by a single hyphen.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
Documentation/hwmon/tmp103.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/hwmon/tmp103.rst b/Documentation/hwmon/tmp103.rst
index e195a7d14309..b3ef81475cf8 100644
--- a/Documentation/hwmon/tmp103.rst
+++ b/Documentation/hwmon/tmp103.rst@@ -21,10 +21,10 @@ Description The TMP103 is a digital output temperature sensor in a four-ball wafer chip-scale package (WCSP). The TMP103 is capable of reading temperatures to a resolution of 1°C. The TMP103 is specified for -operation over a temperature range of –40°C to +125°C. +operation over a temperature range of -40°C to +125°C. Resolution: 8 Bits -Accuracy: ±1°C Typ (–10°C to +100°C) +Accuracy: ±1°C Typ (-10°C to +100°C) The driver provides the common sysfs-interface for temperatures (see Documentation/hwmon/sysfs-interface.rst under Temperatures).
--
2.30.2