On Tue, Apr 20, 2021 at 11:16:09AM +0200, Geert Uytterhoeven wrote:

Hi Daniel,

On Tue, Apr 20, 2021 at 10:46 AM Daniel Vetter [off-list ref] wrote:

quoted

On Mon, Apr 19, 2021 at 10:00:56AM +0200, Geert Uytterhoeven wrote:

quoted

On Fri, Apr 16, 2021 at 11:00 AM Thomas Zimmermann [off-list ref] wrote:

quoted

This patchset adds support for simple-framebuffer platform devices and
a handover mechanism for native drivers to take-over control of the
hardware.

The new driver, called simpledrm, binds to a simple-frambuffer platform
device. The kernel's boot code creates such devices for firmware-provided
framebuffers, such as EFI-GOP or VESA. Typically the BIOS, UEFI or boot
loader sets up the framebuffers. Description via device tree is also an
option.

I guess this can be used as a replacement for offb, too...

quoted

Patches 4 to 8 add the simpledrm driver. It's build on simple DRM helpers
and SHMEM. It supports 16-bit, 24-bit and 32-bit RGB framebuffers. During

.... if support for 8-bit frame buffers would be added?

Is that 8-bit greyscale or 8-bit indexed with 256 entry palette? Former

8-bit indexed with 256 entry palette.

quoted

shouldn't be a big thing, but the latter is only really supported by the
overall drm ecosystem in theory. Most userspace assumes that xrgb8888
works, and we keep that illusion up by emulating it in kernel for hw which
just doesn't support it. But reformatting xrgb8888 to c8 is tricky at
best. The uapis are all there for setting the palette, and C8 is a defined
format even with atomic kms interface, but really there's not much
userspace for it. In other words, it would work as well as current offb
would, but that's at least that.

Oh, that's good to know!
Does this mean fbdev is not deprecated for anything <= C8? ;-)

Nope. It just means you wont be able to use drm-only userspace with it
most likely, without also investing a ton of effort into porting those
over.

A while ago, I was looking into converting an fbdev driver to drm, and
one of the things I ran into is lack of C4, C2, C1, Y8, Y4, Y2, and
monochrome support.  On top of that, lots of internal code seems to
assume pixels are never smaller than a byte (thus ignoring
char_per_block[]/block_w).  The lack of support for planar modes isn't
that bad, combined with the need for copying, as c2p conversion can be
done while copying, thus even making life easier for userspace
applications that can just always work on chunky data.
Then real work kicked in, before I got anything working...

We support drm_fourcc, so adding more pixel formats is not problem at all.
Anything indexed/paletted will simply not work great with unchanged drm
userspace, because you can't really convert it over from the common
denominator of xrgb888. But if it's just about adding support, adding more
fourcc codes isn't a big deal. The fbdev layer hasn't been taught about
fourcc codes yet, but that's also just for lack of need by anyone.

Also we support abitrary uneven pixel packing too, with some generic
support for anything that's at least somewhat regular. That's been the
case for a while now. It was added for fancy tiling and compression
formats, but works equally well for anything else that's aligned different
than what can be described with simplistic bytes-per-pixel only.
-Daniel
-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch