[PATCH v2 10/24] docs: misc-devices/bh1770glc.txt: convert to ReST
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Date: 2020-02-17 16:20:53
Subsystem:
documentation, the rest · Maintainers:
Jonathan Corbet, Linus Torvalds
- Adjust document title markup;
- use list markups;
- Adjust identations to display properly at ReST output.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../{bh1770glc.txt => bh1770glc.rst} | 45 +++++++++++++------
Documentation/misc-devices/index.rst | 1 +
2 files changed, 33 insertions(+), 13 deletions(-)
rename Documentation/misc-devices/{bh1770glc.txt => bh1770glc.rst} (83%)
diff --git a/Documentation/misc-devices/bh1770glc.txt b/Documentation/misc-devices/bh1770glc.rst
similarity index 83%
rename from Documentation/misc-devices/bh1770glc.txt
rename to Documentation/misc-devices/bh1770glc.rst
index 7d64c014dc70..ea5ca58bb958 100644
--- a/Documentation/misc-devices/bh1770glc.txt
+++ b/Documentation/misc-devices/bh1770glc.rst@@ -1,9 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= Kernel driver bh1770glc ======================= Supported chips: -ROHM BH1770GLC -OSRAM SFH7770 + +- ROHM BH1770GLC +- OSRAM SFH7770 Data sheet: Not freely available
@@ -48,12 +52,16 @@ chip_id RO - shows detected chip type and version power_state - RW - enable / disable chip. Uses counting logic - 1 enables the chip - 0 disables the chip + RW - enable / disable chip + + Uses counting logic + + - 1 enables the chip + - 0 disables the chip lux0_input RO - measured lux value + sysfs_notify called when threshold interrupt occurs lux0_sensor_range
@@ -66,16 +74,22 @@ lux0_rate_avail RO - supported measurement rates lux0_thresh_above_value - RW - HI level threshold value. All results above the value + RW - HI level threshold value + + All results above the value trigs an interrupt. 65535 (i.e. sensor_range) disables the above interrupt. lux0_thresh_below_value - RW - LO level threshold value. All results below the value + RW - LO level threshold value + + All results below the value trigs an interrupt. 0 disables the below interrupt. lux0_calibscale - RW - calibration value. Set to neutral value by default. + RW - calibration value + + Set to neutral value by default. Output results are multiplied with calibscale / calibscale_default value.
@@ -84,32 +98,37 @@ lux0_calibscale_default prox0_raw RO - measured proximity value + sysfs_notify called when threshold interrupt occurs prox0_sensor_range RO - prox0_raw max value prox0_raw_en - RW - enable / disable proximity - uses counting logic - 1 enables the proximity - 0 disables the proximity + RW - enable / disable proximity + + Uses counting logic + + - 1 enables the proximity + - 0 disables the proximity prox0_thresh_above_count RW - number of proximity interrupts needed before triggering the event prox0_rate_above RW - Measurement rate (in Hz) when the level is above threshold - i.e. when proximity on has been reported. + i.e. when proximity on has been reported. prox0_rate_below RW - Measurement rate (in Hz) when the level is below threshold - i.e. when proximity off has been reported. + i.e. when proximity off has been reported. prox0_rate_avail RO - Supported proximity measurement rates in Hz prox0_thresh_above0_value RW - threshold level which trigs proximity events. + Filtered by persistence filter (prox0_thresh_above_count) prox0_thresh_above1_value
diff --git a/Documentation/misc-devices/index.rst b/Documentation/misc-devices/index.rst
index c2e880d78734..40a4c104e7a2 100644
--- a/Documentation/misc-devices/index.rst
+++ b/Documentation/misc-devices/index.rst@@ -15,6 +15,7 @@ fit into other categories. :maxdepth: 2 ad525x_dpot + bh1770glc eeprom c2port ibmvmc
--
2.24.1