Thread (5 messages) flat view 5 messages, 4 authors, 2020-01-05
STALE2438d

[PATCH net-next v2 2/2] net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKR

From: Russell King <hidden>
Date: 2020-01-03 20:43:35
Also in: netdev
Subsystem: broadcom ethernet phy drivers, ethernet phy library, generic phy framework, marvell mv88x3310 phy driver, marvell mvpp2 ethernet driver, networking drivers, sff/sfp/sfp+ module support, the rest · Maintainers: Florian Fainelli, Andrew Lunn, Heiner Kallweit, Vinod Koul, Russell King, Marek Behún, Marcin Wojtas, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds 

Switch network drivers, phy drivers, and SFP/phylink over to use the
more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane
ethernet, which is 10GBASE-R with autonegotiation on top, which our
current usage on the affected platforms does not have.

The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia
PHY, which has a separate mode for 10GBASE-KR.

For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R
for compatibility with existing DT - this is the only network driver
at present that makes use of PHY_INTERFACE_MODE_10GKR.

Signed-off-by: Russell King <redacted>
---
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 19 +++++++++++++-----
 drivers/net/phy/aquantia_main.c               |  7 +++++--
 drivers/net/phy/bcm84881.c                    |  4 ++--
 drivers/net/phy/marvell10g.c                  | 11 +++++-----
 drivers/net/phy/phylink.c                     |  1 +
 drivers/net/phy/sfp-bus.c                     |  2 +-
 drivers/phy/marvell/phy-mvebu-cp110-comphy.c  | 20 +++++++++----------
 7 files changed, 39 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index cd32c7196a7f..72133cbe55d4 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -1114,7 +1114,7 @@ mvpp2_shared_interrupt_mask_unmask(struct mvpp2_port *port, bool mask)
 /* Port configuration routines */
 static bool mvpp2_is_xlg(phy_interface_t interface)
 {
-	return interface == PHY_INTERFACE_MODE_10GKR ||
+	return interface == PHY_INTERFACE_MODE_10GBASER ||
 	       interface == PHY_INTERFACE_MODE_XAUI;
 }
 
@@ -1200,7 +1200,7 @@ static int mvpp22_gop_init(struct mvpp2_port *port)
 	case PHY_INTERFACE_MODE_2500BASEX:
 		mvpp22_gop_init_sgmii(port);
 		break;
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 		if (port->gop_id != 0)
 			goto invalid_conf;
 		mvpp22_gop_init_10gkr(port);
@@ -1649,7 +1649,7 @@ static void mvpp22_pcs_reset_deassert(struct mvpp2_port *port)
 	xpcs = priv->iface_base + MVPP22_XPCS_BASE(port->gop_id);
 
 	switch (port->phy_interface) {
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 		val = readl(mpcs + MVPP22_MPCS_CLK_RESET);
 		val |= MAC_CLK_RESET_MAC | MAC_CLK_RESET_SD_RX |
 		       MAC_CLK_RESET_SD_TX;
@@ -4758,7 +4758,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
 
 	/* Invalid combinations */
 	switch (state->interface) {
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 	case PHY_INTERFACE_MODE_XAUI:
 		if (port->gop_id != 0)
 			goto empty_set;
@@ -4780,7 +4780,7 @@ static void mvpp2_phylink_validate(struct phylink_config *config,
 	phylink_set(mask, Asym_Pause);
 
 	switch (state->interface) {
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 	case PHY_INTERFACE_MODE_XAUI:
 	case PHY_INTERFACE_MODE_NA:
 		if (port->gop_id == 0) {
@@ -5247,6 +5247,15 @@ static int mvpp2_port_probe(struct platform_device *pdev,
 		goto err_free_netdev;
 	}
 
+	/*
+	 * Rewrite 10GBASE-KR to 10GBASE-R for compatibility with existing DT.
+	 * Existing usage of 10GBASE-KR is not correct; no backplane
+	 * negotiation is done, and this driver does not actually support
+	 * 10GBASE-KR.
+	 */
+	if (phy_mode == PHY_INTERFACE_MODE_10GKR)
+		phy_mode = PHY_INTERFACE_MODE_10GBASER;
+
 	if (port_node) {
 		comphy = devm_of_phy_get(&pdev->dev, port_node, NULL);
 		if (IS_ERR(comphy)) {
diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index 975789d9349d..31927b2c7d5a 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -358,9 +358,11 @@ static int aqr107_read_status(struct phy_device *phydev)
 
 	switch (FIELD_GET(MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK, val)) {
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
-	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
 		phydev->interface = PHY_INTERFACE_MODE_10GKR;
 		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
+		break;
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
 		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
 		break;
@@ -493,7 +495,8 @@ static int aqr107_config_init(struct phy_device *phydev)
 	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
 	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
 	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
-	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
+	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
+	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)
 		return -ENODEV;
 
 	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,
diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index db59911b9b3c..14d55a77eb28 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -53,7 +53,7 @@ static int bcm84881_config_init(struct phy_device *phydev)
 	switch (phydev->interface) {
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_2500BASEX:
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 		break;
 	default:
 		return -ENODEV;
@@ -218,7 +218,7 @@ static int bcm84881_read_status(struct phy_device *phydev)
 	if (mode == 1 || mode == 2)
 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
 	else if (mode == 3)
-		phydev->interface = PHY_INTERFACE_MODE_10GKR;
+		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
 	else if (mode == 4)
 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
 	switch (mode & 7) {
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 512f27b0b5cd..64c9f3bba2cd 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -216,7 +216,7 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 	sfp_parse_support(phydev->sfp_bus, id, support);
 	iface = sfp_select_interface(phydev->sfp_bus, support);
 
-	if (iface != PHY_INTERFACE_MODE_10GKR) {
+	if (iface != PHY_INTERFACE_MODE_10GBASER) {
 		dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
 		return -EINVAL;
 	}
@@ -304,7 +304,7 @@ static int mv3310_config_init(struct phy_device *phydev)
 	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
 	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
 	    phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
-	    phydev->interface != PHY_INTERFACE_MODE_10GKR)
+	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)
 		return -ENODEV;
 
 	return 0;
@@ -386,16 +386,17 @@ static void mv3310_update_interface(struct phy_device *phydev)
 {
 	if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
 	     phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
-	     phydev->interface == PHY_INTERFACE_MODE_10GKR) && phydev->link) {
+	     phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&
+	    phydev->link) {
 		/* The PHY automatically switches its serdes interface (and
-		 * active PHYXS instance) between Cisco SGMII, 10GBase-KR and
+		 * active PHYXS instance) between Cisco SGMII, 10GBase-R and
 		 * 2500BaseX modes according to the speed.  Florian suggests
 		 * setting phydev->interface to communicate this to the MAC.
 		 * Only do this if we are already in one of the above modes.
 		 */
 		switch (phydev->speed) {
 		case SPEED_10000:
-			phydev->interface = PHY_INTERFACE_MODE_10GKR;
+			phydev->interface = PHY_INTERFACE_MODE_10GBASER;
 			break;
 		case SPEED_2500:
 			phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index ba9468cc8e13..cf9ce4b67826 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -298,6 +298,7 @@ static int phylink_parse_mode(struct phylink *pl, struct fwnode_handle *fwnode)
 			break;
 
 		case PHY_INTERFACE_MODE_10GKR:
+		case PHY_INTERFACE_MODE_10GBASER:
 			phylink_set(pl->supported, 10baseT_Half);
 			phylink_set(pl->supported, 10baseT_Full);
 			phylink_set(pl->supported, 100baseT_Half);
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c
index 06e6429b8b71..d949ea7b4f8c 100644
--- a/drivers/net/phy/sfp-bus.c
+++ b/drivers/net/phy/sfp-bus.c
@@ -373,7 +373,7 @@ phy_interface_t sfp_select_interface(struct sfp_bus *bus,
 	    phylink_test(link_modes, 10000baseLRM_Full) ||
 	    phylink_test(link_modes, 10000baseER_Full) ||
 	    phylink_test(link_modes, 10000baseT_Full))
-		return PHY_INTERFACE_MODE_10GKR;
+		return PHY_INTERFACE_MODE_10GBASER;
 
 	if (phylink_test(link_modes, 2500baseX_Full))
 		return PHY_INTERFACE_MODE_2500BASEX;
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index e3b87c94aaf6..e41367f36ee1 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -221,7 +221,7 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1, COMPHY_FW_MODE_HS_SGMII),
 	ETH_CONF(2, 0, PHY_INTERFACE_MODE_RXAUI, 0x1, COMPHY_FW_MODE_RXAUI),
-	ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1, COMPHY_FW_MODE_XFI),
+	ETH_CONF(2, 0, PHY_INTERFACE_MODE_10GBASER, 0x1, COMPHY_FW_MODE_XFI),
 	GEN_CONF(2, 0, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	GEN_CONF(2, 0, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
 	GEN_CONF(2, 0, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
@@ -235,14 +235,14 @@ static const struct mvebu_comphy_conf mvebu_comphy_cp110_modes[] = {
 	/* lane 4 */
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2, COMPHY_FW_MODE_HS_SGMII),
-	ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2, COMPHY_FW_MODE_XFI),
+	ETH_CONF(4, 0, PHY_INTERFACE_MODE_10GBASER, 0x2, COMPHY_FW_MODE_XFI),
 	ETH_CONF(4, 0, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
 	GEN_CONF(4, 0, PHY_MODE_USB_DEVICE_SS, COMPHY_FW_MODE_USB3D),
 	GEN_CONF(4, 1, PHY_MODE_USB_HOST_SS, COMPHY_FW_MODE_USB3H),
 	GEN_CONF(4, 1, PHY_MODE_PCIE, COMPHY_FW_MODE_PCIE),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1, COMPHY_FW_MODE_SGMII),
 	ETH_CONF(4, 1, PHY_INTERFACE_MODE_2500BASEX, -1, COMPHY_FW_MODE_HS_SGMII),
-	ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GKR, -1, COMPHY_FW_MODE_XFI),
+	ETH_CONF(4, 1, PHY_INTERFACE_MODE_10GBASER, -1, COMPHY_FW_MODE_XFI),
 	/* lane 5 */
 	ETH_CONF(5, 1, PHY_INTERFACE_MODE_RXAUI, 0x2, COMPHY_FW_MODE_RXAUI),
 	GEN_CONF(5, 1, PHY_MODE_SATA, COMPHY_FW_MODE_SATA),
@@ -342,7 +342,7 @@ static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 		 MVEBU_COMPHY_SERDES_CFG0_RXAUI_MODE);
 
 	switch (lane->submode) {
-	case PHY_INTERFACE_MODE_10GKR:
+	case PHY_INTERFACE_MODE_10GBASER:
 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
 		break;
@@ -417,7 +417,7 @@ static int mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
 	/* refclk selection */
 	val = readl(priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
 	val &= ~MVEBU_COMPHY_MISC_CTRL0_REFCLK_SEL;
-	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
+	if (lane->submode == PHY_INTERFACE_MODE_10GBASER)
 		val |= MVEBU_COMPHY_MISC_CTRL0_ICP_FORCE;
 	writel(val, priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
 
@@ -564,7 +564,7 @@ static int mvebu_comphy_set_mode_rxaui(struct phy *phy)
 	return mvebu_comphy_init_plls(lane);
 }
 
-static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
+static int mvebu_comphy_set_mode_10gbaser(struct phy *phy)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
@@ -735,8 +735,8 @@ static int mvebu_comphy_power_on_legacy(struct phy *phy)
 	case PHY_INTERFACE_MODE_RXAUI:
 		ret = mvebu_comphy_set_mode_rxaui(phy);
 		break;
-	case PHY_INTERFACE_MODE_10GKR:
-		ret = mvebu_comphy_set_mode_10gkr(phy);
+	case PHY_INTERFACE_MODE_10GBASER:
+		ret = mvebu_comphy_set_mode_10gbaser(phy);
 		break;
 	default:
 		return -ENOTSUPP;
@@ -782,8 +782,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
 				lane->id);
 			fw_speed = COMPHY_FW_SPEED_3125;
 			break;
-		case PHY_INTERFACE_MODE_10GKR:
-			dev_dbg(priv->dev, "set lane %d to 10G-KR mode\n",
+		case PHY_INTERFACE_MODE_10GBASER:
+			dev_dbg(priv->dev, "set lane %d to 10GBASE-R mode\n",
 				lane->id);
 			fw_speed = COMPHY_FW_SPEED_103125;
 			break;
-- 
2.20.1
Other recent patches touching these files
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help