[PATCH v2 25/28] docs: i2c: old-module-parameters: use monospace instead of ""
From: Luca Ceresoli <luca@lucaceresoli.net>
Date: 2020-01-23 14:58:14
Also in:
linux-i2c, lkml
Subsystem:
i2c subsystem, the rest · Maintainers:
Andi Shyti, Linus Torvalds
Use a monospace (literal) formatting for better readability of sysfs attributes and the "dummy" client name. This looks much more readable in ReST-generated output. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Jean Delvare <redacted> --- Changes in v2: - reword commit message to not mention filenames (Jean Delvare) --- Documentation/i2c/old-module-parameters.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/Documentation/i2c/old-module-parameters.rst b/Documentation/i2c/old-module-parameters.rst
index 92a403d21a62..3b93cb88eebc 100644
--- a/Documentation/i2c/old-module-parameters.rst
+++ b/Documentation/i2c/old-module-parameters.rst@@ -10,9 +10,9 @@ I2C device driver binding control from user-space Up to kernel 2.6.32, many I2C drivers used helper macros provided by <linux/i2c.h> which created standard module parameters to let the user control how the driver would probe I2C buses and attach to devices. These -parameters were known as "probe" (to let the driver probe for an extra -address), "force" (to forcibly attach the driver to a given device) and -"ignore" (to prevent a driver from probing a given address). +parameters were known as ``probe`` (to let the driver probe for an extra +address), ``force`` (to forcibly attach the driver to a given device) and +``ignore`` (to prevent a driver from probing a given address). With the conversion of the I2C subsystem to the standard device driver binding model, it became clear that these per-module parameters were no
@@ -47,8 +47,8 @@ New method (sysfs interface):: # echo dummy 0x2f > /sys/bus/i2c/devices/i2c-1/new_device # modprobe <driver> -Of course, it is important to instantiate the "dummy" device before loading +Of course, it is important to instantiate the ``dummy`` device before loading the driver. The dummy device will be handled by i2c-core itself, preventing other drivers from binding to it later on. If there is a real device at the problematic address, and you want another driver to bind to it, then simply -pass the name of the device in question instead of "dummy". +pass the name of the device in question instead of ``dummy``.
--
2.25.0