On Tue, 13 Nov 2018 14:09:50 +0000
Vitor Soares [off-list ref] wrote:

This patch series is a proposal for the I3C master driver for Synopsys IP.
This patch is to be applied on top of I3C subsystem RFC V10 submitted by
Boris Brezillon.

Supported features:
  Regular CCC commands.
  I3C private transfers.
  I2C transfers.

Missing functionalities:
  Support DMA interface.
  Support for I3C_BUS_MODE_MIXED_SLOW.
  Hot-join.
  IBI.

Patchset queued to i3c/next.

Thanks,

Boris

Main change between v3 and v4:
- Minor fixes. They are described in each patch

Main change between v2 and v3:
- Minor fixes. They are described in each patch

Main change between v1 and v2:
- Add controller version on dt-binding
- The driver now calls writesl/readsl() instead readl/writel
- Rename some variables in the driver

Vitor Soares (3):
  i3c: master: Add driver for Synopsys DesignWare IP
  dt-binding: i3c: Document Synopsys DesignWare I3C
  MAINTAINERS: Add myself as the dw-i3c-master module maintainer

 .../devicetree/bindings/i3c/snps,dw-i3c-master.txt |   41 +
 MAINTAINERS                                        |    6 +
 drivers/i3c/master/Kconfig                         |   14 +
 drivers/i3c/master/Makefile                        |    1 +
 drivers/i3c/master/dw-i3c-master.c                 | 1216 ++++++++++++++++++++
 5 files changed, 1278 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.txt
 create mode 100644 drivers/i3c/master/dw-i3c-master.c