Re: [PATCH 4/3 v2] x86/mm/doc: Enhance the x86-64 virtual memory layout descriptions
From: Baoquan He <hidden>
Date: 2018-10-09 04:48:46
Also in:
lkml
On 10/09/18 at 08:35am, Baoquan He wrote:
Hi Andy, Ingo On 10/06/18 at 03:17pm, Andy Lutomirski wrote:quoted
On Sat, Oct 6, 2018 at 10:03 AM Ingo Molnar [off-list ref] wrote:quoted
... but unless I'm missing something it's not really fundamental for it to be at the PGD level - it could be two levels lower as well, and it could move back to the same place where it's on the 47-bit kernel.The subtlety is that, if it's lower than the PGD level, there end up being some tables that are private to each LDT-using mm that map things other than the LDT. Those tables cover the same address range as some corresponding tables in init_mm, and if those tables in init_mm change after the LDT mapping is set up, the changes won't propagate. So it probably could be made to work, but it would take some extra care.In 4-level paging mode, we reserve 512 GB virtual address space for it to map, the 512 GB is one PGD entry. In 5-level paging mode, we reserve 4 PB for mapping LDT, and leave the previous 512 GB space next to cpu_entry_area mapping empty as unused hole. Maybe we can still put LDT map for PTI in the old place, after cpu_entry_area mapping in 5-level. Then in 5-level, 512 GB is only one p4d entry, however it's in the last pgd entry, each pgd points to 256 TB area, and the last pgd entry will points to p4d table which always exists in system since it contains kernel text mapping etc. Now if LDT take one entry in the always existing p4d table, maybe it can still works as before it owns a whole pgd entry, oh, no, 4 PB will cost 16 pgd entries.
Sorry, I am too long-winded. Here I mean that LDT map of 512 GB will occupy one p4d entry alone, and the corresponding pgd and p4d table are all always presnet and populated and unchanged. It might not need any page table change to propagate. Not sure if there's any other risk in this case. Thanks Baoquan
Most importantly, putting LDT map for PTI in KASLR area, won't it cause
code bug, if we randomize the direct mapping/vmaloc/vmemmap to make them
overlap with LDT map area? We didn't take LDT into consideration when do
memory region KASLR.
4-level virutal memory layout:
ffff800000000000 | -128 TB | ffff87ffffffffff | 8 TB | ... guard hole, also reserved for hypervisor
ffff880000000000 | -120 TB | ffffc7ffffffffff | 64 TB | direct mapping of all physical memory (page_offset_base)
ffffc80000000000 | -56 TB | ffffc8ffffffffff | 1 TB | ... unused hole
ffffc90000000000 | -55 TB | ffffe8ffffffffff | 32 TB | vmalloc/ioremap space (vmalloc_base)
ffffe90000000000 | -23 TB | ffffe9ffffffffff | 1 TB | ... unused hole
ffffea0000000000 | -22 TB | ffffeaffffffffff | 1 TB | virtual memory map (vmemmap_base)
ffffeb0000000000 | -21 TB | ffffebffffffffff | 1 TB | ... unused hole
ffffec0000000000 | -20 TB | fffffbffffffffff | 16 TB | KASAN shadow memory
fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
| | | | vaddr_end for KASLR
fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | LDT remap for PTI
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks
5-level virtual memory layout:
ff10000000000000 | -60 PB | ff8fffffffffffff | 32 PB | direct mapping of all physical memory (page_offset_base)
ff90000000000000 | -28 PB | ff9fffffffffffff | 4 PB | LDT remap for PTI
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ffa0000000000000 | -24 PB | ffd1ffffffffffff | 12.5 PB | vmalloc/ioremap space (vmalloc_base)
ffd2000000000000 | -11.5 PB | ffd3ffffffffffff | 0.5 PB | ... unused hole
ffd4000000000000 | -11 PB | ffd5ffffffffffff | 0.5 PB | virtual memory map (vmemmap_base)
ffd6000000000000 | -10.5 PB | ffdeffffffffffff | 2.25 PB | ... unused hole
ffdf000000000000 | -8.25 PB | fffffdffffffffff | ~8 PB | KASAN shadow memory
fffffc0000000000 | -4 TB | fffffdffffffffff | 2 TB | ... unused hole
| | | | vaddr_end for KASLR
fffffe0000000000 | -2 TB | fffffe7fffffffff | 0.5 TB | cpu_entry_area mapping
fffffe8000000000 | -1.5 TB | fffffeffffffffff | 0.5 TB | ... unused hole
ffffff0000000000 | -1 TB | ffffff7fffffffff | 0.5 TB | %esp fixup stacks